EP-0049: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
(Blanked the page)
Tag: Blanking
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
='''0.96 Inch OLED Module'''=
==Description==
These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. <br>
This display is made of 128x64 individual yellow and blue  OLED pixels, each one is turned on or off by the controller chip.<br>
Because the display makes its own light, no backlight is required. <br>
This reduces the power required to run the OLED.<br>
This breakout can be used with either an SPI interface<br>
The design is completely 3.3V-ready, with an onboard regulator and built in boost converter.<br>
The SSD1306 embeds with contrast control, display RAM and oscillator, which reduces the number of<br>
external components and power consumption. <br>
It has 256-step brightness control.<br>
it supports Raspberry Pi A, A+,B,B+,2B,3B.<br>
----


==Feature:==
* Resolution: 128 x 64
* 3.3V work voltage ,([MIN 1.6V] ,[MAX:3.6V])
** Maximum current 100uA
** Keep up current 12.25uA
* Hardware keep up display
* SPI driver support
* FP frequency:  30fps(60MHz)
* Only use 3 pins to control OLED: (IO24 = DC, IO25 = Reset, SPI0)
* Wide range of operating temperature: -40°C to 85°C
----
==Parameters:==
*Dimensions: 36.36mm x 29.53mm x 11.65(include header)mm
*Weight without package: 7.15±2g
----
==Hardware Architechture==
[[File:096oled.png|thumb|left|300px]]
<br style="clear:both;">
----
==Package included:==
1 x 0.96 Inch OLED Module
----
===How to use===
First of all, you should check the model of your Pi.
----
===For  Raspberry Pi A,A+,B,B+:===
*First login, and download driver:
<code>git clone https://github.com/hallard/ArduiPi_SSD1306</code>
* Compile it and run:
<code>cd  ArduiPi_SSD1306/  </code><br>
<code>sudo make </code><br>
<code>cd  example/ </code><br>
<code>sudo  make  </code><br>
<code>sudo ./oled_demo </code><br>
----
===For Raspberry Pi 2B, 3B:===
*First login, and download driver:
<code>git clone -b ArduiPi_OLED  https://github.com/yoyojacky/libssd1306</code>
*Compile it and run:
<code>cd  libssd1306/ </code><br>
<code>sudo make </code><br>
<code>cd  example/</code><br>
<code>sudo  make</code><br>
<code>sudo ./oled_demo </code>
----
===FAQ===
*Question: 
**Answer: 
----

Latest revision as of 12:22, 4 August 2026

Retrieved from "https://wiki.52pi.com/index.php?title=EP-0049&oldid=16542"