EP-0076: Difference between revisions
Jump to navigation
Jump to search
Line 49: | Line 49: | ||
==How to wire up== | ==How to wire up== | ||
Just Plug into GPIO with this module. | |||
* NOTE: Please be ware of the No.1 Pin is fit for your GPIO No.1 Pin. | |||
---- | ---- | ||
==How to get analog data== | ==How to get analog data== | ||
---- | ---- |
Revision as of 12:24, 31 October 2016
RPI-ADS1115-ADC-Module
Description
The ADS1113, ADS1114, and ADS1115 are precision analog-to-digital converters (ADCs) with 16 bits of resolution offered in an ultra-small, leadless QFN-10 package or an MSOP-10 package. The ADS1113/4/5 are designed with precision, power, and ease of implementation in mind. The ADS1113/4/5 feature an onboard reference and oscillator. Data are transferred via an I2C-compatible serial interface, four I2C slave addresses can be selected. The ADS1113/4/5 operate from a single power supply ranging from 2.0V to 5.5V. The ADS1113/4/5 can perform conversions at rates up to 860 samples per second (SPS). An onboard PGA is available on the ADS1114 and ADS1115 that offers input ranges from the supply to as low as ±256mV, allowing both large and small signals to be measured with high resolution. The ADS1115 also features an input multiplexer (MUX) that provides two differential or four single-ended inputs. The ADS1113/4/5 operate either in continuous conversion mode or a single-shot mode that automatically powers down after a conversion and greatly reduces current consumption during idle periods. The ADS1113/4/5 are specified from –40°C to +125°C.
Features
Parameters | Values |
---|---|
ULTRA-SMALL QFN PACKAGE: | 2mm × 1,5mm × 0,4mm |
WIDE SUPPLY RANGE: | 2.0V to 5.5V |
LOW CURRENT CONSUMPTION: | Continuous Mode: Only 150μA
Single-Shot Mode: Auto Shut-Down |
PROGRAMMABLE DATA RATE: | 8SPS to 860SPS |
INTERNAL LOW-DRIFT: | VOLTAGE REFERENCE |
INTERNAL OSCILLATOR | Available |
INTERNAL PGA | Available |
I2C™ INTERFACE: | Pin-Selectable Addresses |
FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS | ADS1115 |
PROGRAMMABLE COMPARATOR | ADS1114 and ADS1115 |
How to wire up
Just Plug into GPIO with this module.
- NOTE: Please be ware of the No.1 Pin is fit for your GPIO No.1 Pin.