X4000P SKU:EZ-0054: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
(Blanked the page)
Tag: Blanking
 
Line 1: Line 1:
=X4000 Expansion Board=
 
==Description==
X4000 Expansion Board for Raspberry Pi.
----
==For Use With==
* Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
----
==Operating System==
* Moode Audio Player - Supports X4000 HDMI audio and RPi i2s audio
* OSMC - Supports X4000 HDMI audio
* Openelec - Supports X4000 HDMI audio
* Raspbian Jessie - Supports X4000 HDMI audio
* Rune audio - Supports X4000 HDMI audio
* Pi Core Player - To be tested
----
==Key Features==
* High-quality ESS DAC for best sound quality
* Use the ESS Technology flagship DAC chipset (ES9018K2M)
* 127dB DNR -120dB THD+N
* It can playback upto 384khz I2S/DSD256 with Raspberry Pi 3 (Over HDMI, Moode Player)
* Used the Texas Instruments Burr-Brown OPA2604 low noise OP AMP
* Used the ultralow phase noise 100MHz HiFi TCXO
* Used the Texas Instruments ultra-low-noise voltage regulator
* Gold-plated RCA connectors
* Supports up to 1TB 2.5-inch SATA hard drives
* Selectable HDMI audio or Raspberry Pi i2S audio
* Supports SPDIF Optical Digital Audio
* Supports HDMI high-bit-rate (HBR) audio
* High quality video performance
* 3.5mm analog stereo jack output
* Allows you to split the audio stream from a HDMI signal
* No HDMI output connection is required to receive audio at the analog and optical outputs
* Connects directly to the Raspberry Pi - no additional cables needed
* Can be used individually with only 3 wire I2S signal connected from other i2s interface
* Powers the Raspberry Pi - no additional power supply
* Easy DIY with Raspberry Pi
----
==Specification==
{| class="wikitable"
!Parameters !! Values
|-
|Power supply: ||+5Vdc +/-5%
|-
|Input Ports: || 1 x HDMI, Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
|-
|Output Ports: || 1 x HDMI, 2 x RCA connectors, 1 x 3.5mm Phone Jack + Optical
|-
|Analog audio output level:|| 2V RMS
|-
|Resolution/Sampling Rate: || Upto 32bit / 384KHz (ES9018K2M), upto 24bit / 192KHz (Raspberry Pi I2S), upto 24bit / 192KHz (Optical S/PDIF Audio)
|-
|Optical Audio Format: || LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
|-
|Size:||85mm x 87mm
|}
----
==Power Supply Unit==
* AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
* With 2 snap-in plugs for North America (US) and Europe (EU)
* DC Power Plug Size : 5.5*2.5mm
----
==Notes==
For use with original power supply unit only
<font color=red><pre>
WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
</pre></font>
Approx 3 seconds delay to turn on Raspberry Pi after power supplied.
(The powerful HDMI audio processing chipset needs time to bootup)
----
==Packing List==
* X4000 Expansion board x 1
* HDMI bridge x 1
* Spacer M2.5 x 20mm x 4
* Screw M2.5 x 6mm x 8
* Power Supply  x 1
----
==Gallery==
{|
|[[File:X4000-800p1.jpg|left|500px]]
|[[File:X4000-1000p1.jpg|none|500px]]
|}
----
{|
|[[File:X4000-1000p2.jpg|left|500px]]
|[[File:X4000-1000p4.jpg|none|500px]]
|}
----
{|
|[[File:X4000-1000p5.jpg|none|500px]]
|}
----

Latest revision as of 12:19, 4 August 2026

Retrieved from "https://wiki.52pi.com/index.php?title=X4000P_SKU:EZ-0054&oldid=16532"