X300 SKU: EZ-0003: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
(Blanked the page)
Tag: Blanking
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
==X300 EXPANSION BOARD==
[[File:X300 860p.JPG|left|300px]]
<br style="clear:both;">
----
{|-
|[[File:X300 165p5.jpg|left]]
|[[File:X300 165p1.JPG|none]]
|[[File:X300 165p2.JPG|none]]
|[[File:X300 165p6.JPG|none]]
|[[File:X300 165p4.JPG|none]]
|}
<br style="clear:both;">
----


==KEY FEATURES==
{| class="wikitable"
|-
! Parameter !! Value
|-
|Input Voltage || 6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi
|-
|SATA|| Allows you to connect SATA devices to your Raspberry Pi 
|-
|Audio|| 3.5mm MIC in jack
- 3.5mm stereo audio jack
- SPDIF output
- Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
|-
|Wireless || WiFi (IEEE 802.11b/g/n) with external antenna
- IR sensor (38KHz)
- Bluetooth serial communication
|-
|USB Storage || Self-powered USB hub with 3 ports
|-
|Real-time clock (RTC) || Based on DS3231SN with included CR2032 battery
|-
|Misc || Power output socket
- Camera flex slot so camera can still be used with the expansion  board attached
- DIP switch to remove connection from RPi’s pin header
- Directly connected on top of the Raspberry Pi using the board GPIO header pins
- No wiring nor soldering is required
- Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
- Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW!
|-
|Dimensions || 85 x 56mm (Same size as Raspberry Pi)
|}
----
==PACKING LIST==
*1 x X300 expansion board
*1 x USB adapter
*1 x 2.4GHz WIFI antenna
*4 x nylon spacers (M3 x 20mm)
*8 x nylon screws  (M3 x 6mm)
----
==QUICK START GUIDE==
*A. Fitting the expansion board
*B. Operation system
*C. Power supply
*D. Microphone input and audio output
*E. Audio input and output interface
*F. Setting RTC time
*G. Testing the IR receiver
*H. SATA port
*I. Bluetooth serial communication
----
**A. FITTING THE EXPANSION BOARD
1. Push a screws up through the mounting hole on the underside of the Raspberry Pi and screw the spacer down until it is hand tight<br>
[[File:Assembly 275p1.jpg|left]]
<br style="clear:both;">
-----
2. Plugs the expansion board straight into      your Raspberry Pi B+'s GPIO header and  screw down.<br>
[[File:Assembly 275p2.jpg|left]]
<br style="clear:both;">
----
3. Insert the USB adapter
[[File:Assembly 275p4.jpg|left]]
<br style="clear:both;">
----
4. Install the WiFi antenna
[[File:Assembly 275p5.jpg|left]]
<br style="clear:both;">

Latest revision as of 12:18, 4 August 2026

Retrieved from "https://wiki.52pi.com/index.php?title=X300_SKU:_EZ-0003&oldid=16525"