X200 SKU: EZ-0002: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
No edit summary
(Blanked the page)
Tag: Blanking
 
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
==X200 EXPANSION BOARD==
 
[[File:X200_860p.JPG|thumb|left|300px]]
<br style="clear:both;">
----
{|-
|[[File:X200 165p1.JPG|left|]]
|[[File:X200 165p2.JPG|none]]
|[[File:X200 165p3.JPG|none]]
|[[File:X200 165p5.jpg|none]]
|[[File:X200 165p6.JPG|none]]
|}
<br style="clear:both;">
----
==KEY FEATURES==
{| class="wikitable"
|-
!Parameters !! Value
|-
|Input Voltage || 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
|-
|VGA output || HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC 
|-
|Audio || 3.5mm MIC in jack
- 3.5mm stereo audio jack
- SPDIF output
- Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
|-
|Wireless || WiFi (IEEE 802.11b/g/n) with external antenna
- IR sensor (38KHz)
|-
|USB Storage || Self-powered USB hub with 3 ports
|-
|Real-time clock (RTC) ||  Based on DS3231SN with included CR2032 battery
|-
|GPIO Control ||  8-channel Darlington driver chip  (ULN2803) allowing to control electronic circuits which require more current
|-
|Misc ||  Power output socket
- Camera flex slot so camera can still be used with the expansion  board attached
- DIP switch to remove connection from RPi’s pin header
- Directly connected on top of the Raspberry Pi using the board GPIO header pins
- No wiring nor soldering is required
- Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
- Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW!
|-
|Dimensions || 85 x 56mm (Same size as Raspberry Pi)
|}
----
==PACKING LIST==
*1 x X200 expansion board
*1 x HDMI adapter
*1 x USB adapter
*1 x 2.4GHz WIFI antenna
*4 x nylon spacers (M3 x 20mm)
*8 x nylon screws  (M3 x 6mm)
----
==QUICK START GUIDE==
  A. Fitting the expansion board
  B. Operation system
  C. Power supply
  D. HDMI to VGA converter
  E. Microphone input and audio output
  F. Audio input and output interface
  G. Setting RTC time
  H. Testing the IR reveiver
  I. ULN2803 8-channel RC servo port
----
===A. FITTING THE EXPANSION BOARD===
[[File:Step1.jpg|600px]]
<br style="clear:both;">
----
=== B. OPERATION SYSTEM===
----
=== C. POWER SUPPLY===
----
===D. HDMI TO VGA CONVERTER===
----
===E. MICROPHONE INPUT AND AUDIO OUTPUT===
----
=== F. AUDIO INPUT AND OUTPUT INTERFACE===
----
=== G. SETTING RTC TIME===
----
=== H. TESTING THE IR RECEIVER===
----
===I. ULN2803 8-CHANNEL RC SERVO PORT===
----

Latest revision as of 12:18, 4 August 2026

Retrieved from "https://wiki.52pi.com/index.php?title=X200_SKU:_EZ-0002&oldid=16524"