EZ-0086: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
(Blanked the page)
Tag: Blanking
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
==X725==
==Description==
The X725 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. <br>
It provides intelligent and safe power management, remote power on/wake on lan, safe shutdown and full poweroff through software, an advanced uninterruptible power supply, and second 10/100M fast Ethernet.<br>
The X725 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.<br>
The X725 can also be used with the X820, X825, X850, X855, X856, X828 (HDD/SSD Shield) for safe data backup.
==Note & Warnings==
<font color=red>
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB or Type-C SOCKET. <br>
DO NOT APPLY POWER TO X725 VIA THE MICRO USB SOCKET AND DC JACK AT THE SAME TIME. <br>
DO NOT USE  18650 BATTERY WITH BUILT-IN PROTECTION CIRCUIT.<br>
</font>
* You must read these safety instructions and warnings before charging your batteries.
<pre>
* Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
* Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
* Do not mix and use old batteries and new batteries, or batteries with different brand names.
* Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
* When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X720 on the wood material or carpet and unattended.
* Must keep the X720 away from children.
</pre>


==Compatibility==
* Raspberry Pi 1 Model B+ /2 Model B/3 Model B/3 Model B+/3 Model A+/4 Model B
* OS: Raspbian Stretch
<pre>NOTE: Safe shutdown function tested for Raspbian, other operating systems to be tested and advised</pre>
==Features==
===X725 POWER MANAGEMENT EXPANSION BOARD===
* Smart Uninterruptible Power Supply (UPS)
* Provides continuous operations for up to 10hours (depending on battery type used)
* 5.1V 8000mA Power Backup for even the most demanding Raspberry Pi set ups
* 18650 dual Cells Lithium Ion Holder
* Can work with single or dual 18650 Lithium Ion battery
* Supports 2A via micro-USB socket or 3A via DC jack fast charging
* Integrated battery protection circuit
* Integrated over current protection and over voltage protection
* Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c)
* Integrated 10-A fully-integrated synchronous boost converter
* Intelligent automatic charging and discharging
* Automatic safe shutdown when battery low (voltage <3.0V)
* On-board LED blinking when the battery condition low (voltage <3.0V)
* On-board LEDs show the status of battery charging and discharging
===Intelligent and safe power management===
* Press the power button to turn on
* Press the button and hold for 1~2seconds to reboot
* Press the button and hold for 3~7seconds to implement safe shutdown
* Press the button and hold for >8seconds to force shutdown
* Supports safe shutdown and full poweroff through software
* On-board LED shows the status of power on, reboot and shutdown
===Integrated second 10/100M fast Ethernet===
* Supports remote power on/wake on lan via Link-change, Magic packet, MS wakeup frame
* On-board LED shows the status of power on/wakeup packet indication
===Reserved 40-pin stackable Header for Add-On Boards===
* Powers the Raspberry Pi via the 40-pin header - no additional cabling required
* Works with all current models of the Raspberry Pi using a 40 pin header
* Power management and second Ethernet can still work without battery
* On-board DC jack (5.5*2.5mm) and micro-USB socket convenient for power input
* On-board connector allowing to connect external power switch and DIY your perfect case
* Mounting holes and standoffs provide mechanical stability of the RPi and X725 assembly
===X725 RASPBERRY PI 3 MODEL B DESKTOP COMPUTER KIT===
* Ultra-compact aluminum chassis
* All ports and slots of the case can match with Raspberry Pi and X725 perfectly
* Exhaust holes surface can reach perfect heat dissipation
* Equipped with large power switch
* All status LEDs still visible
* Easy to change the Raspberry Pi OS SD card - No need to open the case
* GPIO reference board included -Makes connecting wires to the Raspberry Pi GPIO incredibly easy
* Grouped the GPIO pins into categories like I2C, IO, UART, SPI, and power
==Technical Specification==
* Power supply via Micro-USB socket : 4.7~5.5Vdc, 2.5A Via DC power jack : 4.7~5.5Vdc ±5%, ≥4A
* UPS output : 5.1V ±5% Max 8A
* UPS charging current: 2A via Micro-USB socket, 3A via DC jack
* Terminal Battery Voltage : 4.2V 
* Recharge Threshold : 4.1V
==Gallery==
==Package Includes==
===X725 BOARD KIT===
* X725 Expansion Board x 1
* Screw M2.5 *6mm x 8
* Spacer F/F M2.5 *23mm x 4
* Spacer F/M M2.5 *23mm x 4
* Jumper link Pitch 2.54mm x 3
* USB to Micro USB 2.0 cable x 1
===X725 DESKTOP COMUPTER KIT===
<pre>For Raspberry Pi 3 Model B only, not for Raspberry Pi 4</pre>
* X725 enclosure x 1
* GPIO reference & switch board x 1
* Power button board x 1
* Power switch cap x 1
* Socket spanner 4mm x 1
* Spacer F/M M2.5 *21mm x 4
* Screw M3 *6mm x 6
==Keywords==
* X725,Raspberry Pi 4B, power supply

Latest revision as of 12:17, 4 August 2026

Retrieved from "https://wiki.52pi.com/index.php?title=EZ-0086&oldid=16515"