S-0007 - Revision history

Yoyojacky: /* For Raspberry Pi 4B */

2022-02-17T10:45:44Z

For Raspberry Pi 4B

← Older revision		Revision as of 18:45, 17 February 2022
Line 44:		Line 44:
	===How to program it===		===How to program it===
	===For Raspberry Pi 4B===		===For Raspberry Pi 4B===
	* ~~Open a terminal and Download demo~~ code ~~from: [ https:~~//~~github.com~~/~~adafruit~~/~~Adafruit_Python_SSD1306 ]~~		* Turn on i2c function by using:
	<pre>		<code>sudo raspi-config</code> -> <code>interface options</code> -> <code>i2c</code> -> <code>enable</code> -><code> yes</code><br>.
	sudo ~~python~~ -~~m pip~~ install --~~upgrade~~ pip ~~setuptools wheel~~		* Check if the screen has been recognized by Raspberry Pi
	git clone https://github.com/~~adafruit~~/~~Adafruit_Python_SSD1306~~.git		<pre>i2cdetect -y 1 </pre>
	cd ~~Adafruit_Python_SSD1306~~		** If encount command not found error, please install i2c-tools by using:
	~~sudo python setup~~.~~py install~~		<pre> sudo apt update && sudo apt -y install i2c-tools</pre>
	~~pip install Adafruit-BBIO~~		*Install dependencies libraries:
			<pre>sudo apt -y install python3 python3-pip python3-pil libjpeg-dev zlib1g-dev libfreetype6-dev liblcms2-dev libopenjp2-7 libtiff5</pre>
			* Grant privilleges to user pi
			<pre>sudo usermod -a -G gpio,i2c pi</pre>
			* Download sample code from this repo:
			<pre>git clone https://github.com/rm-hull/luma.examples.git
			cd luma.examples/
	</pre>		</pre>
	* ~~Run~~ example ~~Demo:~~		* Install the dependencies
	<pre>		<pre>sudo -H pip3 install -e . </pre>
	cd examples/		* Entering into example folder and test it.
	~~python stats~~.py		<pre>cd luma.examples/examples/
			python3 sys_info.py
	</pre>		</pre>
	** More documents:		* You should seen this screen on OLED.
	* Download SSD1306 OLED ~~display Arduino library from Github: [ https://github~~.~~com/adafruit/Adafruit_SSD1306 ]~~

	==FAQ==		==FAQ==

Yoyojacky: Yoyojacky moved page PiOLED (0.91 Inch OLED Module) SKU: S-0007 to S-0007

2021-08-27T11:54:42Z

Yoyojacky moved page PiOLED (0.91 Inch OLED Module) SKU: S-0007 to S-0007

← Older revision	Revision as of 19:54, 27 August 2021
(No difference)

Yoyojacky: /* For Raspberry Pi 4B */

2021-06-29T08:06:36Z

For Raspberry Pi 4B

← Older revision		Revision as of 16:06, 29 June 2021
Line 50:		Line 50:
	cd Adafruit_Python_SSD1306		cd Adafruit_Python_SSD1306
	sudo python setup.py install		sudo python setup.py install
			pip install Adafruit-BBIO
	</pre>		</pre>
	* Run example Demo:		* Run example Demo:

Yoyojacky: /* Package Includes */

2020-07-21T06:32:57Z

Package Includes

← Older revision		Revision as of 14:32, 21 July 2020
Line 32:		Line 32:
	==Package Includes==		==Package Includes==
	* 2* 0.91 Inch OLED Module		* 2* 0.91 Inch OLED Module
	* 2* ~~10Pin~~ male to female breadboard wire		* 2* 5Pin male to female breadboard wire

	==How to use==		==How to use==
	===How to wire it up===		===How to wire it up===

Yoyojacky: /* How to program it */

2020-04-22T04:11:34Z

How to program it

← Older revision		Revision as of 12:11, 22 April 2020
Line 42:		Line 42:

	===How to program it===		===How to program it===
	~~First of all, you should turn on I2C function on your~~ Pi ~~by editing /boot/config.txt file.<br>~~		===For Raspberry Pi 4B===
	<code~~>sudo vim.tiny~~ /~~boot~~/~~config~~.~~txt <~~/~~code><br>~~		* Open a terminal and Download demo code from: [ https://github.com/adafruit/Adafruit_Python_SSD1306 ]
	~~make sure you can find this parameter:<br>~~		<pre>
	~~<code>dtparam=i2c_arm=on<~~/~~code><br>~~		sudo python -m pip install --upgrade pip setuptools wheel
	~~And don't forget to reboot your Pi.~~<br>		git clone https://github.com/adafruit/Adafruit_Python_SSD1306.git
	* Login your Pi and download driver:<br>		cd Adafruit_Python_SSD1306
	~~<code>~~git clone ~~-b ArduiPi_OLED~~ https://github.com/~~yoyojacky~~/~~libssd1306</code>~~		sudo python setup.py install
	*Compile it and run:<br>		</pre>
	~~<code>~~cd ~~libssd1306/ </code><br>~~		* Run example Demo:
	~~<code>~~sudo ~~make~~ </~~code><br~~>		<pre>
	~~<code>cd~~ example~~/</code>~~<br>		cd examples/
	~~<code>sudo make<~~/~~code><br>~~		python stats.py
	~~<code>sudo~~ .~~/oled_demo -o 2 </code><br>~~		</pre>
	~~if you need help, you can just use this command:<br>~~
	~~<code>sudo ./oled_demo -h~~ </~~code><br~~>
	** More documents:		** More documents:
	* Download SSD1306 OLED display Arduino library from Github: [ https://github.com/adafruit/Adafruit_SSD1306 ]		* Download SSD1306 OLED display Arduino library from Github: [ https://github.com/adafruit/Adafruit_SSD1306 ]

Yoyojacky: /* How to wire it up */

2020-02-25T07:05:32Z

How to wire it up

← Older revision		Revision as of 15:05, 25 February 2020
Line 36:		Line 36:
	===How to wire it up===		===How to wire it up===
	Connect OLED module to Raspberry Pi's GPIO(3.3v,SDA,SCL,GND)		Connect OLED module to Raspberry Pi's GPIO(3.3v,SDA,SCL,GND)
			===Pin Definitions===
			[[File:OLEDDef8.jpg\|left\|500px]]
			<br style="clear:both;">
	----		----

	===How to program it===		===How to program it===
	First of all, you should turn on I2C function on your Pi by editing /boot/config.txt file.<br>		First of all, you should turn on I2C function on your Pi by editing /boot/config.txt file.<br>

Yoyojacky: /* 0.91 Inch OLED Module */

2020-02-25T05:03:24Z

0.91 Inch OLED Module

← Older revision		Revision as of 13:03, 25 February 2020
Line 1:		Line 1:
	==0.91 Inch OLED Module==		==PiOLED (0.91 Inch OLED Module)==
	[[File:OLED4.jpg\|right\|320px]]		[[File:OLED4.jpg\|right\|320px]]

Yoyojacky: Yoyojacky moved page PiOLED (0.91 Inch OLED Module) to PiOLED (0.91 Inch OLED Module) SKU: S-0007

2020-02-25T05:02:56Z

Yoyojacky moved page PiOLED (0.91 Inch OLED Module) to PiOLED (0.91 Inch OLED Module) SKU: S-0007

← Older revision	Revision as of 13:02, 25 February 2020
(No difference)

Yoyojacky: Yoyojacky moved page 0.91 Inch OLED Module SKU: S-0007 to PiOLED (0.91 Inch OLED Module): Rename

2020-02-25T05:02:19Z

Yoyojacky moved page 0.91 Inch OLED Module SKU: S-0007 to PiOLED (0.91 Inch OLED Module): Rename

← Older revision	Revision as of 13:02, 25 February 2020
(No difference)

Yoyojacky: /* How to program it */

2020-02-25T05:00:11Z

How to program it

← Older revision		Revision as of 13:00, 25 February 2020
Line 53:		Line 53:
	if you need help, you can just use this command:<br>		if you need help, you can just use this command:<br>
	<code>sudo ./oled_demo -h </code><br>		<code>sudo ./oled_demo -h </code><br>
			** More documents:
			* Download SSD1306 OLED display Arduino library from Github: [ https://github.com/adafruit/Adafruit_SSD1306 ]

	==FAQ==		==FAQ==
	*Question: why does it not show anything that I've tried as your instruction？ <br>		*Question: why does it not show anything that I've tried as your instruction？ <br>