RGB 1602(chinese) - Revision history

TaterLi: 修改注释.

2015-07-02T14:51:48Z

修改注释.

← Older revision		Revision as of 22:51, 2 July 2015
Line 238:		Line 238:
	<br>[[#SSD1306-Revision 1.0.pdf\|屏幕手册]]		<br>[[#SSD1306-Revision 1.0.pdf\|屏幕手册]]

	<br />如对此页的规则或教程有意见者，可到[[Minecraft_Wiki_talk:wiki编辑手册\|此网页]]或是在[[User talk:~~Powup333~~\|~~管理员Powup333的讨论页~~]]留言。		<br />如对此页的规则或教程有意见者，可到[[Minecraft_Wiki_talk:wiki编辑手册\|此网页]]或是在[[User talk:Gbfootball\|编辑员Gbfootball的讨论页]]留言。

TaterLi: 修改了一些附件链接名.

2015-07-02T14:46:36Z

修改了一些附件链接名.

← Older revision		Revision as of 22:46, 2 July 2015
Line 235:		Line 235:
	==附件==		==附件==
	<div id="tech1"></div>		<div id="tech1"></div>
	<br>[[1306-0.91-CODE.zip]]		<br>[[#1306-0.91-CODE.zip\|参考代码]]
	<br>[[SSD1306-Revision 1.0.pdf]]		<br>[[#SSD1306-Revision 1.0.pdf\|屏幕手册]]

	<br />如对此页的规则或教程有意见者，可到[[Minecraft_Wiki_talk:wiki编辑手册\|此网页]]或是在[[User talk:Powup333\|管理员Powup333的讨论页]]留言。		<br />如对此页的规则或教程有意见者，可到[[Minecraft_Wiki_talk:wiki编辑手册\|此网页]]或是在[[User talk:Powup333\|管理员Powup333的讨论页]]留言。

TaterLi at 14:21, 2 July 2015

2015-07-02T14:21:07Z

New page

=树莓派 RGB1602 显示模块=
==产品简介==
相比原来的LCD1602显示模块我们做了一些改进，使其融合LCD多彩显示和按键扩展功能。 
LCD1602是一款提供2行16字符液晶显示的树莓派扩展板。扩展了多个按键输入，可供用户作为LCD显示屏的菜单选择按键或者操控按键使用。 
一个扩展板就能让你与树莓派进行互动。用户可以通过调节扩展板上的微型电位器,调节LCD屏的对比度。 对于树莓派初学者来说，不必为繁琐复杂液晶驱动电路连线而头疼了。 
这款1602 LCD扩展板将电路简化，直接将此板插到树莓派系统板上即可使用。 
通过i2c操作的mcp23016扩展io口,减少了对树莓派引脚的占用。 调用wiringPi的lcd库，简单的几行代码便可以完数据和字符的显示功能。 
除此之外,显示模块可以单独取出和面包板搭配使用,避免了浪费。 
[[Image:DSC 0003.JPG|thumb|TaterLi 修改|180px]]
==产品参数==
{| width="998" cellspacing="0" border="1"
|-
! align="center" scope="col" style="width: 40%" | 项目
! align="center" scope="col" | 参数

|-
| align="center" scope="row" | 模块电压
| align="center" | 5V

|-
| align="center" scope="row" | 背光颜色
| align="center" | 红绿蓝
|-
|align="center" scope="row" | 模块最大电流
| align="center" | 60mA
|-
| align="center" scope="row" | LCD 显示模式
| align="center" | STN
|-
| align="center" scope="row" | 工作温度
| align="center" | 0～+50℃
|-
| align="center" scope="row" | 存储温度
| align="center" | -20～+70℃
|-
| align="center" scope="row" | 模块尺寸
| align="center" | 82x58(mm)
|-
| align="center" scope="row" | 显示区域
| align="center" | 64.5x16
|-
| align="center" scope="row" | 显示字符数目
| align="center" | 16x2行
|-
| align="center" scope="row" | 控制器
| align="center" | SplC780
|-
| align="center" scope="row" | 安装尺寸/孔径
| align="center" | 75.0*31.0/ 2.8mm
|-
| align="center" scope="row" | 显示字符数目
| align="center" | 16x2行
|-
| align="center" scope="row" | LCD点大小
| align="center" | 0.55*0.65mm
|-
| align="center" scope="row" | 接口形式/尺寸
| align="center" | 18PIN,PH2.54,1.0mm
|}

==产品展示==
 [[Image:RGB1602_p1.JPG|1000px]]
 [[Image:RGB1602_p4.JPG|1000px]]
 [[Image:RGB1602_p5.JPG|1000px]]
 [[Image:RGB1602_p3.JPG|1000px]]
==电气连接图==
[[Image:1602test1.png|center|1000px]]
==RGB1602显示模块引脚说明==
{| width="998" cellspacing="0" border="1"
|-
! align="center" scope="col" style="width: 40%" | 管脚号
! align="center" scope="col" | 符号
! align="center" scope="col" | 功能
|-
| align="center" scope="row" | 1
| align="center" | Vss
| align="center" | 电源地
|-
| align="center" scope="row" | 2
| align="center" | Vdd
| align="center" | 电源正极
|-
|align="center" scope="row" | 3
| align="center" | Vo
| align="center" | LCD偏压输入
|-
| align="center" scope="row" | 4
| align="center" | RS
| align="center" | 数据命令选择
|-
| align="center" scope="row" | 5
| align="center" | R/W
| align="center" | 读写控制信号
|-
| align="center" scope="row" | 6
| align="center" | E
| align="center" | 使能信号
|-
| align="center" scope="row" | 7
| align="center" | DB0
| align="center" | 数据IO口0
|-
| align="center" scope="row" | 8
| align="center" | DB1
| align="center" | 数据IO口1
|-
| align="center" scope="row" | 9
| align="center" | DB1
| align="center" | 数据IO口1
|-
| align="center" scope="row" | 10
| align="center" | DB2
| align="center" | 数据IO口2
|-
| align="center" scope="row" | 11
| align="center" | DB3
| align="center" | 数据IO口3
|-
| align="center" scope="row" | 12
| align="center" | DB4
| align="center" | 数据IO口4
|-
| align="center" scope="row" | 13
| align="center" | DB5
| align="center" | 数据IO口5
|-
| align="center" scope="row" | 14
| align="center" | DB6
| align="center" | 数据IO口6
|-
| align="center" scope="row" | 15
| align="center" | DB7
| align="center" | 数据IO口7
|-
| align="center" scope="row" | 16
| align="center" | LEDA
| align="center" | LED背光灯正极
|-
| align="center" scope="row" | 17
| align="center" | LEDR
| align="center" | 红色LED背光灯控制
|-
| align="center" scope="row" | 18
| align="center" | LEDG
| align="center" | 绿色LED背光灯控制
|-
| align="center" scope="row" | 19
| align="center" | LEDB
| align="center" | 蓝色LED背光灯控制
|-
|}
==如何使用==
#对于初次使用的用户请确保树莓派I2C接口已经打开,如何打I2C请参考 http://www.52pi.net/forum.php?mod=viewthread&tid=1363&highlight=rtc

#首先下载安装0.91'OLED树莓派端驱动[[#tech1|ssd1306 driver]],下载完成后解压缩复制到树莓派用户目录下

#输入指令 sudo apt-get install build-essential git-core libi2c-dev i2c-tools lm-sensors安装驱动屏幕所需要的组件

[[Image:Test1.png|center]]

#待安装完成后,进入/etc目录修改modules文件添加如下I2C硬件配置

i2c-bcm2708
i2c-dev

[[Image:Test3.png|center]]

[[Image:Test4.png|center]]

#进入驱动文件目录下输入sudo make安装驱动程序

[[Image:Test5.png|center]]

#安装成功后打开example文件夹输入make指令编译示例程序，编译成功后发现，当前文件夹下已成功生成可执行文件ssd1306_demo

[[Image:Test6.png|center]]

#输入sudo ./ssd1306_demo执行可以看到0.91'OLED模块已经成功点亮

[[Image:Test7.png|center]]
[[Image:Test9.JPG|center|900px]]

==示例代码说明==
<pre>
#include "OLEDType_SSD1306.h" //包含驱动的头文件
#include "OLED_GFX.h"
#include "OLED_SSD1306.h"

OLED_SSD1306 display; //实例化一个类OLED_SSD1306对象

const unsigned char rpi_2[128] = { /* 0X00,0X01,0X1A,0X00,0X20,0X00, */ //图片的二进制文件
0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X07,0XC1,0XF0,0X00,0X18,0X32,0X06,0X00,
0X10,0X0C,0X02,0X00,0X11,0X0C,0X02,0X00,0X10,0X4C,0X84,0X00,0X08,0X2D,0X04,0X00,
0X0C,0X1E,0X08,0X00,0X06,0X3F,0X10,0X00,0X03,0XE1,0XF0,0X00,0X04,0X40,0X18,0X00,
0X08,0XC0,0X88,0X00,0X09,0XFF,0XE4,0X00,0X0F,0X1C,0X34,0X00,0X1E,0X0C,0X1E,0X00,
0X24,0X0C,0X12,0X00,0X24,0X0C,0X01,0X00,0X24,0X0C,0X11,0X00,0X26,0X1E,0X19,0X00
0X2F,0XE1,0XFB,0X00,0X1B,0XC0,0XE6,0X00,0X10,0XC0,0XC6,0X00,0X10,0XC0,0X84,0X00,
0X08,0X40,0X84,0X00,0X08,0X73,0X0C,0X00,0X06,0X7F,0X98,0X00,0X01,0XC0,0XE0,0X00,
0X00,0XC0,0XC0,0X00,0X00,0X33,0X00,0X00,0X00,0X0C,0X00,0X00,0X00,0X00,0X00,0X00,
};

unsigned char rpi_3[128] = { /* 0X00,0X01,0X1A,0X00,0X20,0X00, */ //图片的二进制文件
0XFF,0XFF,0XFF,0XC0,0XFF,0XFF,0XFF,0XC0,0XF8,0X3E,0X0F,0XC0,0XE7,0XCD,0XF9,0XC0,
0XEF,0XFB,0XFD,0XC0,0XEE,0XF3,0XFD,0XC0,0XEF,0XB3,0X7B,0XC0,0XF7,0XD2,0XFB,0XC0,
0XFF,0XE1,0XFF,0XC0,0XFD,0XC0,0XEF,0XC0,0XFC,0X1E,0X0F,0XC0,0XFB,0XBF,0XE7,0XC0,
0XF7,0X3F,0X77,0XC0,0XF6,0X00,0X1B,0XC0,0XF0,0XE3,0XCB,0XC0,0XE1,0XF3,0XE1,0XC0,
0XDB,0XF7,0XFD,0XC0,0XDB,0XF3,0XFE,0XC0,0XDB,0XF3,0XEE,0XC0,0XD9,0XE1,0XE6,0XC0,
0XD0,0X1E,0X04,0XC0,0XE4,0X3F,0X19,0XC0,0XEF,0X3F,0X39,0XC0,0XFF,0XBF,0X7B,0XC0,
0XF7,0XBF,0X7B,0XC0,0XF7,0X8C,0XF3,0XC0,0XF9,0X80,0X67,0XC0,0XFE,0X3F,0X1F,0XC0,
0XFF,0X3F,0X3F,0XC0,0XFF,0XDC,0XFF,0XC0,0XFF,0XF3,0XFF,0XC0,0XFF,0XFF,0XFF,0XC0,
};

int main(int argc, char **argv)
{
if ( !display.init(OLED_I2C_RESET,OLED_OLED_I2C_128x32) ) //判断屏幕初始化是否成功,否则退出
exit(EXIT_FAILURE);
display.begin(); //开始显示
display.clearDisplay(); //清空屏幕
display.drawBitmap(0,0,rpi_2,32,32,1); //显示图片函数位置为X:0,Y:0,图片为:RPI_2,图片长:32,图片宽:32,显示为黑色字体
display.drawBitmap(96,0,rpi_2,32,32,1); //显示图片函数位置为X:96,Y:0,图片为:RPI_2,图片长:32,图片宽:32,显示为黑色字体
display.drawRect(0,0,128,32,0); //所有区域全部显示白色相当于清空屏幕
display.setTextSize(1); //设置字体大小为1号
display.setTextColor(WHITE); //设置字体显示颜色为白色
display.setCursor(29,0); //设置字体显示位置为X:29,:Y:0
display.print("Hello World"); //设置显示字体内容为Hello World
display.setCursor(29,16); //设置显示字体我\的位置为X:29,Y:16
display.print("www.52pi.cn"); //设置显示的字体内容为www.52pi.cn
display.display(); //显示内容
usleep(10000); //延时

}
</pre>

==购买链接==
==附件==
<div id="tech1"></div>
 [[1306-0.91-CODE.zip]]
 [[SSD1306-Revision 1.0.pdf]]

 如对此页的规则或教程有意见者，可到[[Minecraft_Wiki_talk:wiki编辑手册|此网页]]或是在[[User talk:Powup333|管理员Powup333的讨论页]]留言。

140.206.37.58 at 07:37, 2 July 2015

2015-07-02T07:37:56Z

New page

=树莓派 RGB1602 显示模块=

==产品简介==
相比原来的LCD1602显示模块我们做了一些改进，使其融合LCD多彩显示和按键扩展功能。 
LCD1602是一款提供2行16字符液晶显示的树莓派扩展板。扩展了多个按键输入，可供用户作为LCD显示屏的菜单选择按键或者操控按键使用。 
一个扩展板就能让你与树莓派进行互动。用户可以通过调节扩展板上的微型电位器，调节LCD屏的对比度。 
对于树莓派初学者来说，不必为繁琐复杂液晶驱动电路连线而头疼了。 
这款1602 LCD扩展板将电路简化，直接将此板插到树莓派系统板上即可使用。 
通过i2c操作的mcp23016扩展io口,减少了对树莓派引脚的占用 
调用wiringPi的lcd库，简单的几行代码便可以完数据和字符的显示功能。 
除此之外,显示模块可以单独取出和面包板搭配使用,避免了浪费。
这里我们将会介绍Seeed提供的各种各样的线材。在你做一些应用的时候，难免需要各种各样的飞线。说实话，乱七八糟的飞线看起来很让人心烦，还会经常接错，不过没有办法，除非你为你的应用做一块PCB！ 
==产品参数==
{| width="998" cellspacing="0" border="1"
|-
! align="center" scope="col" style="width: 40%" | 项目
! align="center" scope="col" | 参数

|-
| align="center" scope="row" | 产品名称
| align="center" | 树莓派:0.91'OLED显示模块

|-
| align="center" scope="row" | 分辨率
| align="center" | 128×32
|-
|align="center" scope="row" | 屏幕尺寸
| align="center" | 0.91
|-
| align="center" scope="row" | 显示面积
| align="center" |22.38×5.58MM
|-
| align="center" scope="row" | 显示屏尺寸
| align="center" | 30.0×11.50×1.45
|-
| align="center" scope="row" | 模块尺寸
| align="center" | 35.1(长)x15.12(宽)x11.8(高)MM
|-
| align="center" scope="row" | 像素相邻间距
| align="center" | 0.17×0.17
|-
| align="center" scope="row" | 像素尺寸
| align="center" | 0.15×0.15
|-
| align="center" scope="row" | 工作电压
| align="center" | 3.3V
|}

==产品展示==
[[Image:p14.JPG|330px]][[Image:p13.JPG|330px]][[Image:p15.JPG|330px]]
<center>安装于树莓派端</center>
[[Image:p5.JPG|330px]][[Image:p4.JPG|330px]][[Image:p2.JPG|330px]]
<center>夜晚下的表现</center>
[[Image:p12.JPG|330px]][[Image:p10.JPG|330px]][[Image:p11.JPG|330px]]

==电气连接图==
[[Image:Pic2.png|center|1000px]]
==如何使用==
#对于初次使用的用户请确保树莓派I2C接口已经打开,如何打I2C请参考 http://www.52pi.net/forum.php?mod=viewthread&tid=1363&highlight=rtc

#首先下载安装0.91'OLED树莓派端驱动[[#tech1|ssd1306 driver]],下载完成后解压缩复制到树莓派用户目录下

#输入指令 sudo apt-get install build-essential git-core libi2c-dev i2c-tools lm-sensors安装驱动屏幕所需要的组件

[[Image:Test1.png|center]]

#待安装完成后,进入/etc目录修改modules文件添加如下I2C硬件配置

i2c-bcm2708
i2c-dev

[[Image:Test3.png|center]]

[[Image:Test4.png|center]]

#进入驱动文件目录下输入sudo make安装驱动程序

[[Image:Test5.png|center]]

#安装成功后打开example文件夹输入make指令编译示例程序，编译成功后发现，当前文件夹下已成功生成可执行文件ssd1306_demo

[[Image:Test6.png|center]]

#输入sudo ./ssd1306_demo执行可以看到0.91'OLED模块已经成功点亮

[[Image:Test7.png|center]]
[[Image:Test9.JPG|center|900px]]

==示例代码说明==
<pre>
#include "OLEDType_SSD1306.h" //包含驱动的头文件
#include "OLED_GFX.h"
#include "OLED_SSD1306.h"

OLED_SSD1306 display; //实例化一个类OLED_SSD1306对象

const unsigned char rpi_2[128] = { /* 0X00,0X01,0X1A,0X00,0X20,0X00, */ //图片的二进制文件
0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X07,0XC1,0XF0,0X00,0X18,0X32,0X06,0X00,
0X10,0X0C,0X02,0X00,0X11,0X0C,0X02,0X00,0X10,0X4C,0X84,0X00,0X08,0X2D,0X04,0X00,
0X0C,0X1E,0X08,0X00,0X06,0X3F,0X10,0X00,0X03,0XE1,0XF0,0X00,0X04,0X40,0X18,0X00,
0X08,0XC0,0X88,0X00,0X09,0XFF,0XE4,0X00,0X0F,0X1C,0X34,0X00,0X1E,0X0C,0X1E,0X00,
0X24,0X0C,0X12,0X00,0X24,0X0C,0X01,0X00,0X24,0X0C,0X11,0X00,0X26,0X1E,0X19,0X00
0X2F,0XE1,0XFB,0X00,0X1B,0XC0,0XE6,0X00,0X10,0XC0,0XC6,0X00,0X10,0XC0,0X84,0X00,
0X08,0X40,0X84,0X00,0X08,0X73,0X0C,0X00,0X06,0X7F,0X98,0X00,0X01,0XC0,0XE0,0X00,
0X00,0XC0,0XC0,0X00,0X00,0X33,0X00,0X00,0X00,0X0C,0X00,0X00,0X00,0X00,0X00,0X00,
};

unsigned char rpi_3[128] = { /* 0X00,0X01,0X1A,0X00,0X20,0X00, */ //图片的二进制文件
0XFF,0XFF,0XFF,0XC0,0XFF,0XFF,0XFF,0XC0,0XF8,0X3E,0X0F,0XC0,0XE7,0XCD,0XF9,0XC0,
0XEF,0XFB,0XFD,0XC0,0XEE,0XF3,0XFD,0XC0,0XEF,0XB3,0X7B,0XC0,0XF7,0XD2,0XFB,0XC0,
0XFF,0XE1,0XFF,0XC0,0XFD,0XC0,0XEF,0XC0,0XFC,0X1E,0X0F,0XC0,0XFB,0XBF,0XE7,0XC0,
0XF7,0X3F,0X77,0XC0,0XF6,0X00,0X1B,0XC0,0XF0,0XE3,0XCB,0XC0,0XE1,0XF3,0XE1,0XC0,
0XDB,0XF7,0XFD,0XC0,0XDB,0XF3,0XFE,0XC0,0XDB,0XF3,0XEE,0XC0,0XD9,0XE1,0XE6,0XC0,
0XD0,0X1E,0X04,0XC0,0XE4,0X3F,0X19,0XC0,0XEF,0X3F,0X39,0XC0,0XFF,0XBF,0X7B,0XC0,
0XF7,0XBF,0X7B,0XC0,0XF7,0X8C,0XF3,0XC0,0XF9,0X80,0X67,0XC0,0XFE,0X3F,0X1F,0XC0,
0XFF,0X3F,0X3F,0XC0,0XFF,0XDC,0XFF,0XC0,0XFF,0XF3,0XFF,0XC0,0XFF,0XFF,0XFF,0XC0,
};

int main(int argc, char **argv)
{
if ( !display.init(OLED_I2C_RESET,OLED_OLED_I2C_128x32) ) //判断屏幕初始化是否成功,否则退出
exit(EXIT_FAILURE);
display.begin(); //开始显示
display.clearDisplay(); //清空屏幕
display.drawBitmap(0,0,rpi_2,32,32,1); //显示图片函数位置为X:0,Y:0,图片为:RPI_2,图片长:32,图片宽:32,显示为黑色字体
display.drawBitmap(96,0,rpi_2,32,32,1); //显示图片函数位置为X:96,Y:0,图片为:RPI_2,图片长:32,图片宽:32,显示为黑色字体
display.drawRect(0,0,128,32,0); //所有区域全部显示白色相当于清空屏幕
display.setTextSize(1); //设置字体大小为1号
display.setTextColor(WHITE); //设置字体显示颜色为白色
display.setCursor(29,0); //设置字体显示位置为X:29,:Y:0
display.print("Hello World"); //设置显示字体内容为Hello World
display.setCursor(29,16); //设置显示字体我\的位置为X:29,Y:16
display.print("www.52pi.cn"); //设置显示的字体内容为www.52pi.cn
display.display(); //显示内容
usleep(10000); //延时

}
</pre>

==购买链接==
==附件==
<div id="tech1"></div>
 [[1306-0.91-CODE.zip]]
 [[SSD1306-Revision 1.0.pdf]]

 如对此页的规则或教程有意见者，可到[[Minecraft_Wiki_talk:wiki编辑手册|此网页]]或是在[[User talk:Powup333|管理员Powup333的讨论页]]留言。

140.206.37.58 at 07:28, 2 July 2015

2015-07-02T07:28:32Z

New page

=树莓派 RGB1602 显示模块=

==产品简介==
相比原来的LCD1602扩展板我们做了一些更改，使其融合LCD多彩显示和按键扩展的功能。 
LCD1602是一款提供2行16字符液晶显示的树莓派扩展板。扩展了多个按键输入，可供用户作为LCD显示屏的菜单选择按键或者操控按键使用。 
一个扩展板就能让你与树莓派进行互动。用户可以通过调节扩展板上的微型电位器，调节LCD屏的对比度。 
对于树莓派初学者来说，不必为繁琐复杂液晶驱动电路连线而头疼了。 
这款1602 LCD扩展板将电路简化，直接将此板插到树莓派系统板上即可使用。 
通过i2c操作的mcp23016扩展io口,减少了对树莓派引脚的占用 
调用wiringPi的lcd库，简单的几行代码便可以完数据和字符的显示功能。 
除此之外,显示模块可以单独取出和面包板搭配使用,避免了浪费。

==产品参数==
{| width="998" cellspacing="0" border="1"
|-
! align="center" scope="col" style="width: 40%" | 项目
! align="center" scope="col" | 参数

|-
| align="center" scope="row" | 产品名称
| align="center" | 树莓派:0.91'OLED显示模块

|-
| align="center" scope="row" | 分辨率
| align="center" | 128×32
|-
|align="center" scope="row" | 屏幕尺寸
| align="center" | 0.91
|-
| align="center" scope="row" | 显示面积
| align="center" |22.38×5.58MM
|-
| align="center" scope="row" | 显示屏尺寸
| align="center" | 30.0×11.50×1.45
|-
| align="center" scope="row" | 模块尺寸
| align="center" | 35.1(长)x15.12(宽)x11.8(高)MM
|-
| align="center" scope="row" | 像素相邻间距
| align="center" | 0.17×0.17
|-
| align="center" scope="row" | 像素尺寸
| align="center" | 0.15×0.15
|-
| align="center" scope="row" | 工作电压
| align="center" | 3.3V
|}

==产品展示==
[[Image:p14.JPG|330px]][[Image:p13.JPG|330px]][[Image:p15.JPG|330px]]
<center>安装于树莓派端</center>
[[Image:p5.JPG|330px]][[Image:p4.JPG|330px]][[Image:p2.JPG|330px]]
<center>夜晚下的表现</center>
[[Image:p12.JPG|330px]][[Image:p10.JPG|330px]][[Image:p11.JPG|330px]]

==电气连接图==
[[Image:Pic2.png|center|1000px]]
==如何使用==
#对于初次使用的用户请确保树莓派I2C接口已经打开,如何打I2C请参考 http://www.52pi.net/forum.php?mod=viewthread&tid=1363&highlight=rtc

#首先下载安装0.91'OLED树莓派端驱动[[#tech1|ssd1306 driver]],下载完成后解压缩复制到树莓派用户目录下

#输入指令 sudo apt-get install build-essential git-core libi2c-dev i2c-tools lm-sensors安装驱动屏幕所需要的组件

[[Image:Test1.png|center]]

#待安装完成后,进入/etc目录修改modules文件添加如下I2C硬件配置

i2c-bcm2708
i2c-dev

[[Image:Test3.png|center]]

[[Image:Test4.png|center]]

#进入驱动文件目录下输入sudo make安装驱动程序

[[Image:Test5.png|center]]

#安装成功后打开example文件夹输入make指令编译示例程序，编译成功后发现，当前文件夹下已成功生成可执行文件ssd1306_demo

[[Image:Test6.png|center]]

#输入sudo ./ssd1306_demo执行可以看到0.91'OLED模块已经成功点亮

[[Image:Test7.png|center]]
[[Image:Test9.JPG|center|900px]]

==示例代码说明==
<pre>
#include "OLEDType_SSD1306.h" //包含驱动的头文件
#include "OLED_GFX.h"
#include "OLED_SSD1306.h"

OLED_SSD1306 display; //实例化一个类OLED_SSD1306对象

const unsigned char rpi_2[128] = { /* 0X00,0X01,0X1A,0X00,0X20,0X00, */ //图片的二进制文件
0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X07,0XC1,0XF0,0X00,0X18,0X32,0X06,0X00,
0X10,0X0C,0X02,0X00,0X11,0X0C,0X02,0X00,0X10,0X4C,0X84,0X00,0X08,0X2D,0X04,0X00,
0X0C,0X1E,0X08,0X00,0X06,0X3F,0X10,0X00,0X03,0XE1,0XF0,0X00,0X04,0X40,0X18,0X00,
0X08,0XC0,0X88,0X00,0X09,0XFF,0XE4,0X00,0X0F,0X1C,0X34,0X00,0X1E,0X0C,0X1E,0X00,
0X24,0X0C,0X12,0X00,0X24,0X0C,0X01,0X00,0X24,0X0C,0X11,0X00,0X26,0X1E,0X19,0X00
0X2F,0XE1,0XFB,0X00,0X1B,0XC0,0XE6,0X00,0X10,0XC0,0XC6,0X00,0X10,0XC0,0X84,0X00,
0X08,0X40,0X84,0X00,0X08,0X73,0X0C,0X00,0X06,0X7F,0X98,0X00,0X01,0XC0,0XE0,0X00,
0X00,0XC0,0XC0,0X00,0X00,0X33,0X00,0X00,0X00,0X0C,0X00,0X00,0X00,0X00,0X00,0X00,
};

unsigned char rpi_3[128] = { /* 0X00,0X01,0X1A,0X00,0X20,0X00, */ //图片的二进制文件
0XFF,0XFF,0XFF,0XC0,0XFF,0XFF,0XFF,0XC0,0XF8,0X3E,0X0F,0XC0,0XE7,0XCD,0XF9,0XC0,
0XEF,0XFB,0XFD,0XC0,0XEE,0XF3,0XFD,0XC0,0XEF,0XB3,0X7B,0XC0,0XF7,0XD2,0XFB,0XC0,
0XFF,0XE1,0XFF,0XC0,0XFD,0XC0,0XEF,0XC0,0XFC,0X1E,0X0F,0XC0,0XFB,0XBF,0XE7,0XC0,
0XF7,0X3F,0X77,0XC0,0XF6,0X00,0X1B,0XC0,0XF0,0XE3,0XCB,0XC0,0XE1,0XF3,0XE1,0XC0,
0XDB,0XF7,0XFD,0XC0,0XDB,0XF3,0XFE,0XC0,0XDB,0XF3,0XEE,0XC0,0XD9,0XE1,0XE6,0XC0,
0XD0,0X1E,0X04,0XC0,0XE4,0X3F,0X19,0XC0,0XEF,0X3F,0X39,0XC0,0XFF,0XBF,0X7B,0XC0,
0XF7,0XBF,0X7B,0XC0,0XF7,0X8C,0XF3,0XC0,0XF9,0X80,0X67,0XC0,0XFE,0X3F,0X1F,0XC0,
0XFF,0X3F,0X3F,0XC0,0XFF,0XDC,0XFF,0XC0,0XFF,0XF3,0XFF,0XC0,0XFF,0XFF,0XFF,0XC0,
};

int main(int argc, char **argv)
{
if ( !display.init(OLED_I2C_RESET,OLED_OLED_I2C_128x32) ) //判断屏幕初始化是否成功,否则退出
exit(EXIT_FAILURE);
display.begin(); //开始显示
display.clearDisplay(); //清空屏幕
display.drawBitmap(0,0,rpi_2,32,32,1); //显示图片函数位置为X:0,Y:0,图片为:RPI_2,图片长:32,图片宽:32,显示为黑色字体
display.drawBitmap(96,0,rpi_2,32,32,1); //显示图片函数位置为X:96,Y:0,图片为:RPI_2,图片长:32,图片宽:32,显示为黑色字体
display.drawRect(0,0,128,32,0); //所有区域全部显示白色相当于清空屏幕
display.setTextSize(1); //设置字体大小为1号
display.setTextColor(WHITE); //设置字体显示颜色为白色
display.setCursor(29,0); //设置字体显示位置为X:29,:Y:0
display.print("Hello World"); //设置显示字体内容为Hello World
display.setCursor(29,16); //设置显示字体我\的位置为X:29,Y:16
display.print("www.52pi.cn"); //设置显示的字体内容为www.52pi.cn
display.display(); //显示内容
usleep(10000); //延时

}
</pre>

==购买链接==
==附件==
<div id="tech1"></div>
 [[1306-0.91-CODE.zip]]
 [[SSD1306-Revision 1.0.pdf]]

 如对此页的规则或教程有意见者，可到[[Minecraft_Wiki_talk:wiki编辑手册|此网页]]或是在[[User talk:Powup333|管理员Powup333的讨论页]]留言。