KZ-0067 - Revision history

Yoyojacky: /* Disk Operations */

2024-09-03T04:27:47Z

Disk Operations

← Older revision		Revision as of 12:27, 3 September 2024
Line 141:		Line 141:
	* Check it by using		* Check it by using
	<pre>df -Th </pre>		<pre>df -Th </pre>
			==Keywords==
			* CN01 M.2 M-key PCIe3.0x1 , Raspberry Pi 5 Armor case.
			==Youtube Channel==
			* More Technical tutorial please visit our YouTube channel: [ https://www.youtube.com/@52Pi_Maker_Education ]

Yoyojacky: /* How to enable PCIe on Raspberry Pi 5 ? */

2024-09-03T04:14:58Z

How to enable PCIe on Raspberry Pi 5 ?

← Older revision		Revision as of 12:14, 3 September 2024
Line 75:		Line 75:
	==How to enable PCIe function on Raspberry Pi 5 ==		==How to enable PCIe function on Raspberry Pi 5 ==
	==How to enable PCIe on Raspberry Pi 5 ?==		==How to enable PCIe on Raspberry Pi 5 ?==
	~~<pre>~~We assume that you are using Raspberry Pi OS 64bit ~~on Raspberry Pi 5~~. ~~(codename: bookworm) <~~/~~pre>~~		* We assume that you are using Raspberry Pi OS (bookwork 64bit) which can be download from the official website: [ https://www.raspberrypi.com/software/ ].
	* ~~Step 1.~~ Modify /boot/firmware/config.txt ~~file~~ and adding following parameters:		By default, the external PCIe header is not enabled, so to enable it.
			* Modify /boot/firmware/config.txt and adding following parameters:
	<pre>		<pre>
	dtparam=pciex1		dtparam=pciex1
	~~dtparam=pciex1_gen=3 # Optional, force to use gen3 speed on NVMe SSD, if can support this function is depends on your NVMe SSD's feature.~~
	</pre>		</pre>
	~~[[File:Config~~.~~txt file~~.~~png\|left\|800px]]~~		And the connection is certified for Gen 2.0 speed (5 GT/sec), but you can force it to Gen 3.0 (10 GT/sec) if you add the following line after:
	<~~br style~~=~~clear:both;"~~>		<pre>
			dtparam=pciex1_gen=3
	* Step 2. ~~Save it~~ and ~~reboot your Raspberry Pi 5 to take effect~~.		</pre>
			You can run devices at PCIe Gen 3.0 speeds if you test and they run stable.

			* Enable auto detection PCIe and booting from NVME.
			<pre>
			sudo rpi-eeprom-config --edit
			</pre>
			Adding following parts:
			<pre>
			PCIE_PROBE=1
			BOOT_ORDER=0xf416
			</pre>
			The 6 means to enable booting from nvme.
			Reboot Raspberry Pi 5 and try to use `lsblk` or `lspci -vvv` to get more details of the PCIe device.
	===Disk Operations===		===Disk Operations===
	* Check if SSD drive has been recognized by Raspberry Pi 5.		* Check if SSD drive has been recognized by Raspberry Pi 5.
	<pre>lsblk</pre>		<pre>lsblk</pre>
	~~[[File:Check disk infor.png\|left\|800px]]~~
	~~<br style=clear:both;">~~
	* Make sure the PCIe devices information		* Make sure the PCIe devices information
	[[File:~~Lspci~~.png\|left\|800px]]		[[File:EP-0228-Howto04.png\|left\|800px]]
	<br style=clear:both;">		<br style="clear:both;">

	* Create Partition		* Create Partition
	<pre>sudo fdisk /dev/nvme0n1 </pre>		<pre>sudo fdisk /dev/nvme0n1 </pre>

Yoyojacky: /* How to enable PCIe function on Raspberry Pi 5 */

2024-09-03T04:10:22Z

How to enable PCIe function on Raspberry Pi 5

← Older revision		Revision as of 12:10, 3 September 2024
Line 74:		Line 74:
	<br style="clear:both;">		<br style="clear:both;">
	==How to enable PCIe function on Raspberry Pi 5 ==		==How to enable PCIe function on Raspberry Pi 5 ==
			==How to enable PCIe on Raspberry Pi 5 ?==
			<pre>We assume that you are using Raspberry Pi OS 64bit on Raspberry Pi 5. (codename: bookworm) </pre>
			* Step 1. Modify /boot/firmware/config.txt file and adding following parameters:
			<pre>
			dtparam=pciex1
			dtparam=pciex1_gen=3 # Optional, force to use gen3 speed on NVMe SSD, if can support this function is depends on your NVMe SSD's feature.
			</pre>
			[[File:Config.txt file.png\|left\|800px]]
			<br style=clear:both;">

			* Step 2. Save it and reboot your Raspberry Pi 5 to take effect.

			===Disk Operations===
			* Check if SSD drive has been recognized by Raspberry Pi 5.
			<pre>lsblk</pre>
			[[File:Check disk infor.png\|left\|800px]]
			<br style=clear:both;">
			* Make sure the PCIe devices information
			[[File:Lspci.png\|left\|800px]]
			<br style=clear:both;">
			* Create Partition
			<pre>sudo fdisk /dev/nvme0n1 </pre>
			create one partition by input following characters:
			<pre>
			n -> p -> 1 > Enter -> Enter -> w -> Enter
			</pre>
			n - new
			p - primary partition
			1 - partition number
			Enter -> first cylinder
			Enter -> take the whole disk as last cylinder.
			w - write the partition table to SSD
			q - quit
			* Format the partition
			<pre>
			sudo mkfs.ext4 /dev/nvme0n1p1
			</pre>
			* Mount Partition to Raspberry Pi 5
			<pre> mkdir -pv disk1
			sudo mount -t ext4 /dev/nvme0n1p1 /home/pi/disk1 -v
			</pre>
			* Check if the partition has been mounted properly.
			<pre>
			df -Th
			</pre>
			<br style=clear:both;">
			* Automout the partition by modify /etc/fstab file, you can use vim or nano editor to modify this file /etc/fstab.
			<pre>sudo vim.tiny /etc/fstab</pre>
			<font color=red> NOTE: Please take care of the modifications due to wrong parameters may cause the system corrupted. </font>
			<pre>
			/dev/nvme0n1p1 ext4 /home/pi/disk1 defaults,noatime 0 0
			</pre>
			Save it and try to auto mount
			<pre>sudo mount -a </pre>
			* Check it by using
			<pre>df -Th </pre>

Yoyojacky: /* Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 */

2024-09-03T04:08:36Z

Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5

← Older revision		Revision as of 12:08, 3 September 2024
Line 1:		Line 1:
	==Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 ==		==Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 ==
	[[File:KZ-0067~~-A+~~-01.jpg\|right\|320px]]		[[File:KZ-0067-01.jpg\|right\|320px]]

	==Description==		==Description==

Yoyojacky: /* Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 */

2024-09-03T04:08:04Z

Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5

← Older revision		Revision as of 12:08, 3 September 2024
Line 1:		Line 1:
	==Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 ==		==Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 ==
			[[File:KZ-0067-A+-01.jpg\|right\|320px]]

	==Description==		==Description==
	The Raspberry Pi 5 with 52Pi CN01 M.2 M-key PCIe 3.0 x1 Expansion Board and Armor Case is a comprehensive solution designed to enhance the storage capabilities and protection of the Raspberry Pi 5. This setup utilizes the 52Pi CN01 expansion board to accommodate various M.2 NVMe SSDs, significantly boosting the device's storage capacity. The included Armor case is specifically tailored for the Raspberry Pi 5, ensuring robust protection for both the device and the SSD. The system is designed for users seeking to expand storage and improve boot performance by leveraging the speed of SSDs.		The Raspberry Pi 5 with 52Pi CN01 M.2 M-key PCIe 3.0 x1 Expansion Board and Armor Case is a comprehensive solution designed to enhance the storage capabilities and protection of the Raspberry Pi 5. This setup utilizes the 52Pi CN01 expansion board to accommodate various M.2 NVMe SSDs, significantly boosting the device's storage capacity. The included Armor case is specifically tailored for the Raspberry Pi 5, ensuring robust protection for both the device and the SSD. The system is designed for users seeking to expand storage and improve boot performance by leveraging the speed of SSDs.

Yoyojacky at 04:07, 3 September 2024

2024-09-03T04:07:06Z

@@ Line 1: / Line 1: @@
 ==Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 ==
 ==Description==
+The Raspberry Pi 5 with 52Pi CN01 M.2 M-key PCIe 3.0 x1 Expansion Board and Armor Case is a comprehensive solution designed to enhance the storage capabilities and protection of the Raspberry Pi 5. This setup utilizes the 52Pi CN01 expansion board to accommodate various M.2 NVMe SSDs, significantly boosting the device's storage capacity. The included Armor case is specifically tailored for the Raspberry Pi 5, ensuring robust protection for both the device and the SSD. The system is designed for users seeking to expand storage and improve boot performance by leveraging the speed of SSDs.
 ==Features==
-===Specifications===
+===52Pi CN01 M.2 M-key PCIe 3.0 x1 Expansion Board===

Yoyojacky: Created page with "==Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 == ==Description== ==Features== ===Specifications==="

2024-09-02T10:45:19Z

Created page with "==Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 == ==Description== ==Features== ===Specifications==="

New page

==Armor Case with M.2 M-key PCIe3.0 x1 adapter for Raspberry Pi 5 ==
==Description==

==Features==
===Specifications===