ER-0056 - Revision history

Yoyojacky: /* Keywords */

2025-10-27T02:37:45Z

Keywords

@@ Line 69: / Line 69: @@
 [[File:ER-0056-02.jpg|left|800px]]
 <br style="clear:both;">
 ==Keywords==
 * Official Active cooler for raspberry Pi 5, active cooler, pi5 active cooler.

Yoyojacky: /* Specifications */

2023-11-22T05:06:52Z

Specifications

← Older revision		Revision as of 13:06, 22 November 2023
Line 43:		Line 43:
	\| 4 \|\| Tach		\| 4 \|\| Tach
	\|}		\|}

	==Gallery==		==Gallery==
	* Product outlook		* Product outlook

Yoyojacky: Created page with "==Official Active Cooler for Raspberry Pi 5== 320px ==Description== The Active Cooler is a single-piece anodised aluminium heatsink with an integrated blower. It has pre-applied thermal pads for heat transfer, and is mounted to the Raspberry Pi 5 board directly using spring-loaded push pins. It connects to the same 4-pin JST connector as the case fan. A radial blower, again selected for low noise and extended operating lifetime, pushes air thr..."

2023-11-22T05:06:03Z

Created page with "==Official Active Cooler for Raspberry Pi 5== right|320px ==Description== The Active Cooler is a single-piece anodised aluminium heatsink with an integrated blower. It has pre-applied thermal pads for heat transfer, and is mounted to the Raspberry Pi 5 board directly using spring-loaded push pins. It connects to the same 4-pin JST connector as the case fan. A radial blower, again selected for low noise and extended operating lifetime, pushes air thr..."

New page

==Official Active Cooler for Raspberry Pi 5==
[[File:ER-0056.jpg|right|320px]]
==Description==
The Active Cooler is a single-piece anodised aluminium heatsink with an integrated blower. It has pre-applied thermal pads for heat transfer, and is mounted to the Raspberry Pi 5 board directly using spring-loaded push pins. It connects to the same 4-pin JST connector as the case fan.

A radial blower, again selected for low noise and extended operating lifetime, pushes air through an extruded and milled aluminium heatsink. The cooling performance of the Active Cooler is somewhat superior to the Fan Case, making it particularly suitable for overclockers.

<pre>NOTE
Blowers are electromechanical systems that direct air towards a specific direction using a fan and designated channels. While fans displace large volumes of air and promote circulation within a designated area, blowers provide a degree of air pressurisation to drive it out and forward.
The Active Cooler has not been designed to be repeatedly removed from the Raspberry Pi 5.
</pre>
===Thermals===
A stress test was started on all four cores of the Raspberry Pi 5 to load the CPU. Two main thermal management regimes were examined during the test: no cooling, and managed active cooling. The managed active cooling tests were run using both the Active Cooler, and the Raspberry Pi Case for Raspberry Pi 5.
With no cooling, we see an idle temperature of approximately 65°C, with a maximum temperature above 85°C during extended testing leading to sustained thermal throttling after the temperature reported by the processor rises above throttling limits.

Thanks to the passive heatsink that is fitted with the Active Cooler, we see a much lower idle temperature, around 45°C. During extended testing under load, the fan of the Cooler spins up at low speed to stabilise the CPU temperature at 60°C, with a maximum temperatures of 62 to 63°C being seen during the tests.

Using the fan case we see idle temperatures a couple of degrees hotter than with the Active Cooler on its own, at around 48°C. With the lid removed we see a maximum temperature of approximately 72°C under sustained load, and with the lid in place we see a marginally higher maximum of around 74°C under load. While temperature under load is higher than with the Active Cooler, the maximum temperature under load is still well below the 80 and 85°C throttling temperatures.

Raspberry Pi 5 has been designed to handle typical client workloads, uncased, with no active cooling. For normal use adding cooling is optional, although performance may improve with active cooling. However a heavy continuous load, such as rebuilding the Linux kernel, will force the new Raspberry Pi 5 into thermal throttling. For heavy loads thermal throttling can extend processing times, and passive cooling is probably insufficient thermal management.

However, cooling of any type isn’t mandatory, and no harm will come to the Raspberry Pi if left uncooled.
==Features==
* Efficient Temperature Management:The Active Cooler for Raspberry Pi 5 effectively reduces idle temperatures from approximately 65°C to a much lower 45°C, providing efficient temperature management during normal usage.
* Sustained Cooling Under Load:During extended testing under load, the Active Cooler's fan operates at low speed, stabilizing the CPU temperature at 60°C. This ensures sustained cooling, with maximum temperatures reaching only 62 to 63°C, well below throttling limits.
* Enhanced Performance during Heavy Loads:The Active Cooler proves particularly beneficial during heavy continuous loads, such as rebuilding the Linux kernel, where thermal throttling can occur. It helps maintain a maximum temperature under load that is significantly below the 80 and 85°C throttling thresholds.
* Flexible Cooling Options:The Active Cooler can be used independently with a passive heatsink or integrated into a fan case. This flexibility allows users to choose between different cooling configurations based on their specific needs and preferences.
* Optional Cooling for Improved Performance:While the Raspberry Pi 5 is designed to handle typical client workloads without active cooling, the Active Cooler offers an optional solution for users looking to enhance performance, especially under heavy continuous loads. It ensures that the Raspberry Pi 5 operates optimally, minimizing the impact of thermal throttling.
* No Mandatory Cooling Requirement:It's important to note that while the Active Cooler provides significant benefits in terms of temperature management and performance, cooling of any type, including passive cooling, is not mandatory. The Raspberry Pi 5 can still operate safely without active cooling, and no harm will come to the device if left uncooled.
===Specifications===
* Pinout
The fan connector is a 1mm pitch JST SH socket and has four pins:
{| class="wikitable"
|-
! Pin !!Function
|-
| 1 || +5V
|-
| 2 || PWM
|-
| 3 || GND
|-
| 4 || Tach
|}
==Gallery==
* Product outlook
[[File:ER-0056.jpg|left|800px]]
 
* Active Cooler features
[[ File:ER-0056-01.jpg|left|800px]]
 
[[File:ER-0056-04.jpg|left|800px]]
 
===Specifications===
[[File:ER-0056-05.jpg|left|800px]]
 
* Compatibility
[[File:ER-0056-06.jpg|left|800px]]
 
<pre> Compatible with following SKU: ZP-0162, ZP-0165, ZP-0168 </pre>
* Heat dissipation effect
[[File:ER-0056-07.jpg|left|800px]]
 
===How to install it===
[[File:ER-0056-03.jpg|left|800px]]
 
==Package includes==
[[File:ER-0056-02.jpg|left|800px]]
 
==Keywords==
* Official Active cooler for raspberry Pi 5, active cooler, pi5 active cooler.