EP-0246 - Revision history

Yoyojacky: /* How to enable PCIe on Raspberry Pi 5 */

2025-04-23T08:31:56Z

How to enable PCIe on Raspberry Pi 5

← Older revision		Revision as of 16:31, 23 April 2025
Line 49:		Line 49:
	* Step 2. Connect the FPC cable as following figure.		* Step 2. Connect the FPC cable as following figure.
	[[File:EP-0246-07.jpg\|left\|800px]]		[[File:EP-0246-07.jpg\|left\|800px]]
			<br style="clear:both;">

			==Package includes==
			[[File:EP-0246-PL.jpg\|left\|800px]]
	<br style="clear:both;">		<br style="clear:both;">

Yoyojacky: /* Step 3 */

2025-04-23T08:29:14Z

Step 3

← Older revision		Revision as of 16:29, 23 April 2025
Line 85:		Line 85:
	* Partioning and formating partitions and mount it to your system by using `fdisk` command or `parted` command or other graphic tools.		* Partioning and formating partitions and mount it to your system by using `fdisk` command or `parted` command or other graphic tools.
	* Mount the formated partition to the mounting points, normally, the mounting points usually are folders, you can mount the partitions to those folders so that you can access the `block device` by using those folders.		* Mount the formated partition to the mounting points, normally, the mounting points usually are folders, you can mount the partitions to those folders so that you can access the `block device` by using those folders.
	<pre> please refer to following ~~URL~~ to setup your NVMe SSD</pre>		<pre> please refer to following `DISK SETUP` to setup your NVMe SSD</pre>
	[https://wiki.52pi.com/index.php?title=EP-0229#Step_3 DISK SETUP ]		[https://wiki.52pi.com/index.php?title=EP-0229#Step_3 DISK SETUP ]

	==Keywords==		==Keywords==
	* Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5， Multifunctional adapter with PCIe 3.0x1, M.2 NVMe 2230/2242 adapter board, Pi5's storage expansion board		* Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5， Multifunctional adapter with PCIe 3.0x1, M.2 NVMe 2230/2242 adapter board, Pi5's storage expansion board

Yoyojacky: /* Step 3 */

2025-04-23T08:28:55Z

Step 3

← Older revision		Revision as of 16:28, 23 April 2025
Line 85:		Line 85:
	* Partioning and formating partitions and mount it to your system by using `fdisk` command or `parted` command or other graphic tools.		* Partioning and formating partitions and mount it to your system by using `fdisk` command or `parted` command or other graphic tools.
	* Mount the formated partition to the mounting points, normally, the mounting points usually are folders, you can mount the partitions to those folders so that you can access the `block device` by using those folders.		* Mount the formated partition to the mounting points, normally, the mounting points usually are folders, you can mount the partitions to those folders so that you can access the `block device` by using those folders.
	<pre> please refer to ~~this url:~~ https://wiki.52pi.com/index.php?title=EP-0229#Step_3 ~~to setup your NVMe SSD</pre>~~		<pre> please refer to following URL to setup your NVMe SSD</pre>
			[https://wiki.52pi.com/index.php?title=EP-0229#Step_3 DISK SETUP ]

	==Keywords==		==Keywords==
	* Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5， Multifunctional adapter with PCIe 3.0x1, M.2 NVMe 2230/2242 adapter board, Pi5's storage expansion board		* Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5， Multifunctional adapter with PCIe 3.0x1, M.2 NVMe 2230/2242 adapter board, Pi5's storage expansion board

Yoyojacky: /* Step 3 */

2025-04-23T08:27:44Z

Step 3

← Older revision		Revision as of 16:27, 23 April 2025
Line 85:		Line 85:
	* Partioning and formating partitions and mount it to your system by using `fdisk` command or `parted` command or other graphic tools.		* Partioning and formating partitions and mount it to your system by using `fdisk` command or `parted` command or other graphic tools.
	* Mount the formated partition to the mounting points, normally, the mounting points usually are folders, you can mount the partitions to those folders so that you can access the `block device` by using those folders.		* Mount the formated partition to the mounting points, normally, the mounting points usually are folders, you can mount the partitions to those folders so that you can access the `block device` by using those folders.
			<pre> please refer to this url: https://wiki.52pi.com/index.php?title=EP-0229#Step_3 to setup your NVMe SSD</pre>

			==Keywords==
			* Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5， Multifunctional adapter with PCIe 3.0x1, M.2 NVMe 2230/2242 adapter board, Pi5's storage expansion board

Yoyojacky: /* How to assemble it */

2025-04-23T08:24:29Z

How to assemble it

← Older revision		Revision as of 16:24, 23 April 2025
Line 51:		Line 51:
	<br style="clear:both;">		<br style="clear:both;">

	~~==How to assemble it==~~
	~~TBD.~~
	==How to enable PCIe on Raspberry Pi 5==		==How to enable PCIe on Raspberry Pi 5==
	* We assume that you are using Raspberry Pi OS (bookworm) 2024-03-15		* We assume that you are using Raspberry Pi OS (bookworm) 2024-03-15

Yoyojacky: /* Gallery */

2025-04-23T08:23:42Z

Gallery

@@ Line 30: / Line 30: @@
 ==Gallery==
-TBD.
+* Product outlook
 ==How to assemble it==
 TBD.

Yoyojacky: /* Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5 */

2025-04-23T08:15:42Z

Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5

← Older revision		Revision as of 16:15, 23 April 2025
Line 1:		Line 1:
	==Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5==		==Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5==
			[[File:EP-0246-01.jpg\|right\|320px]]

	==Descriptions==		==Descriptions==
	This is an expansion board for the Raspberry Pi 5. It can convert the Raspberry Pi 5's Micro HDMI to Full-size HDMI, making it easier to connect to standard HDMI cables. It also supports PCIe 3.0x1 devices with an M.2 M-key slot, such as M.2 M-key NVMe SSD 2230/2242 drives. The board allows the Raspberry Pi 5's USB-C to be connected to the rear of the board for more rational wiring and greater convenience for DIY users to build their own Raspberry Pi 5 applications. Currently, due to the on-board PCIe interface settings, it only supports the Raspberry Pi 5 device.		This is an expansion board for the Raspberry Pi 5. It can convert the Raspberry Pi 5's Micro HDMI to Full-size HDMI, making it easier to connect to standard HDMI cables. It also supports PCIe 3.0x1 devices with an M.2 M-key slot, such as M.2 M-key NVMe SSD 2230/2242 drives. The board allows the Raspberry Pi 5's USB-C to be connected to the rear of the board for more rational wiring and greater convenience for DIY users to build their own Raspberry Pi 5 applications. Currently, due to the on-board PCIe interface settings, it only supports the Raspberry Pi 5 device.

Yoyojacky: /* Features */

2025-04-21T09:41:36Z

Features

← Older revision		Revision as of 17:41, 21 April 2025
Line 19:		Line 19:
	* <strong>Compatibility</strong>		* <strong>Compatibility</strong>
	Currently only supports the Raspberry Pi 5 device due to the on-board PCIe interface settings.		Currently only supports the Raspberry Pi 5 device due to the on-board PCIe interface settings.

			==Specifications==
			* M.2 M-key Slot support NVMe SSD length: 2230/2242
			* PCIe Sock: PCIe 3.0 x1
			* INPUT MicroHDMI Port: 2 x Female MicroHDMI
			* OUTPUT HDMI Port： 2 x Full-sized HDMI Port
			* Power INPUT：USB-C (27W Power supply or 27w Official Power Supply)

			==Gallery==
			TBD.
			==How to assemble it==
			TBD.
			==How to enable PCIe on Raspberry Pi 5==
			* We assume that you are using Raspberry Pi OS (bookworm) 2024-03-15
			===Step 1 ===
			* Enable PCIe function
			Edit /boot/firmware/config.txt file and adding following parameter in to the file.
			<strong>And the connection is certified for Gen 2.0 speed (5 GT/sec), but you can force it to Gen 3.0 (10 GT/sec) if you add the following line after: dtparam=pciex1_gen=3, but some SSD may not take effect, if not, please remove this line.
			The Raspberry Pi 5 is not certified for Gen 3.0 speeds. PCIe Gen 3.0 connections may be unstable. <br>
			Refer to: [ https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#pcie-gen-3-0 ] <br>
			so that the dtparam=pciex1_gen=3 is optional.
			</strong><br>
			<pre>NOTE:
			PCIe 4.0 (fourth-generation) solid-state drives (SSDs) are typically designed to be backward compatible, meaning they can operate on lower PCIe versions such as PCIe 2.0 or 3.0. This backward compatibility means that even if the Raspberry Pi 5's PCIe interface only supports up to Gen 2.0, a PCIe 4.0 SSD can still function on a Gen 2.0 interface, but its speed will be limited to the rates of Gen 2.0.

			Specifically, the speed of a PCIe 4.0 SSD on a Gen 2.0 interface will be capped at about 5 GB/s (the theoretical maximum bandwidth of a PCIe 2.0 x1 interface), rather than the higher speeds achievable with a PCIe 4.0 x4 interface. Therefore, while PCIe 4.0 SSDs can be backward compatible with Gen 2.0, they cannot perform at their full potential on a Gen 2.0 interface.
			</pre>

			<pre>
			dtparam=pciex1
			dtparam=pciex1_gen=3
			</pre>
			[[File:Config.txt file.png\|left\|800px]]
			<br style="clear:both;">
			Save it and then do remember reboot your Raspberry Pi to take effect.

			===Step 2 ===
			* Check if the SSD drive has been recognized
			<pre>
			sudo lspci
			sudo lsblk
			</pre>

			===Step 3 ===
			* Partioning and formating partitions and mount it to your system by using `fdisk` command or `parted` command or other graphic tools.
			* Mount the formated partition to the mounting points, normally, the mounting points usually are folders, you can mount the partitions to those folders so that you can access the `block device` by using those folders.

Yoyojacky: Created page with "==Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5== ==Descriptions== This is an expansion board for the Raspberry Pi 5. It can convert the Raspberry Pi 5's Micro HDMI to Full-size HDMI, making it easier to connect to standard HDMI cables. It also supports PCIe 3.0x1 devices with an M.2 M-key slot, such as M.2 M-key NVMe SSD 2230/2242 drives. The board allows the Raspberry Pi 5's USB-C to be connected to the rear of the board for mor..."

2025-04-21T09:22:03Z

Created page with "==Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5== ==Descriptions== This is an expansion board for the Raspberry Pi 5. It can convert the Raspberry Pi 5's Micro HDMI to Full-size HDMI, making it easier to connect to standard HDMI cables. It also supports PCIe 3.0x1 devices with an M.2 M-key slot, such as M.2 M-key NVMe SSD 2230/2242 drives. The board allows the Raspberry Pi 5's USB-C to be connected to the rear of the board for mor..."

New page

==Micro HDMI to HDMI Multifunctional Adapter with PCIe 3.0x1 M.2 NVMe 2230/2242 for rpi5==
==Descriptions==
This is an expansion board for the Raspberry Pi 5. It can convert the Raspberry Pi 5's Micro HDMI to Full-size HDMI, making it easier to connect to standard HDMI cables. It also supports PCIe 3.0x1 devices with an M.2 M-key slot, such as M.2 M-key NVMe SSD 2230/2242 drives. The board allows the Raspberry Pi 5's USB-C to be connected to the rear of the board for more rational wiring and greater convenience for DIY users to build their own Raspberry Pi 5 applications. Currently, due to the on-board PCIe interface settings, it only supports the Raspberry Pi 5 device.

==Features==

* HDMI Conversion
Converts the Raspberry Pi 5's Micro HDMI to Full-size HDMI.
Makes it easier to connect to standard HDMI cables.

* M.2 M-key Slot Support
Supports PCIe 3.0x1 devices with an M.2 M-key slot.
Compatible with M.2 M-key NVMe SSD 2230/2242 drives.

* USB-C Rear Connection
Allows the Raspberry Pi 5's USB-C to be connected to the rear of the board.
Provides more rational wiring and greater convenience for DIY users.

* Compatibility
Currently only supports the Raspberry Pi 5 device due to the on-board PCIe interface settings.