EP-0049 - Revision history

Yoyojacky: Blanked the page

2026-08-04T04:22:15Z

Blanked the page

← Older revision		Revision as of 12:22, 4 August 2026
Line 1:		Line 1:
	~~='''0.96 Inch OLED Module'''=~~
	~~==Description==~~
	~~These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. <br>~~
	~~This display is made of 128x64 individual yellow and blue OLED pixels, each one is turned on or off by the controller chip.<br>~~
	~~Because the display makes its own light, no backlight is required. <br>~~
	~~This reduces the power required to run the OLED.<br>~~
	~~This breakout can be used with either an SPI interface<br>~~
	~~The design is completely 3.3V-ready, with an onboard regulator and built in boost converter.<br>~~
	~~The SSD1306 embeds with contrast control, display RAM and oscillator, which reduces the number of<br>~~
	~~external components and power consumption. <br>~~
	~~It has 256-step brightness control.<br>~~
	~~it supports Raspberry Pi A, A+,B,B+,2B,3B.<br>~~
	~~----~~

	~~==Feature:==~~
	* Resolution: 128 x 64
	* 3.3V work voltage ,([MIN 1.6V] ,[MAX:3.6V])
	** Maximum current 100uA
	** Keep up current 12.25uA
	* Hardware keep up display
	* SPI driver support
	* FP frequency: 30fps(60MHz)
	* Only use 3 pins to control OLED: (IO24 = DC, IO25 = Reset, SPI0)
	* Wide range of operating temperature: -40°C to 85°C
	~~----~~

	~~==Parameters:==~~
	*Dimensions: 36.36mm x 29.53mm x 11.65(include header)mm
	*Weight without package: 7.15±2g
	~~----~~

	~~==Hardware Architechture==~~
	~~[[File:096oled.png\|thumb\|left\|300px]]~~
	~~<br style="clear:both;">~~
	~~----~~
	~~==Package included:==~~
	~~1 x 0.96 Inch OLED Module~~
	~~----~~
	~~===How to use===~~
	~~First of all, you should check the model of your Pi.~~
	~~----~~
	~~===For Raspberry Pi A,A+,B,B+:===~~
	*First login, and download driver:
	~~<code>git clone https://github.com/hallard/ArduiPi_SSD1306</code>~~
	* Compile it and run:
	~~<code>cd ArduiPi_SSD1306/ </code><br>~~
	~~<code>sudo make </code><br>~~
	~~<code>cd example/ </code><br>~~
	~~<code>sudo make </code><br>~~
	~~<code>sudo ./oled_demo </code><br>~~
	~~----~~

	~~===For Raspberry Pi 2B, 3B:===~~
	*First login, and download driver:
	~~<code>git clone -b ArduiPi_OLED https://github.com/yoyojacky/libssd1306</code>~~
	*Compile it and run:
	~~<code>cd libssd1306/ </code><br>~~
	~~<code>sudo make </code><br>~~
	~~<code>cd example/</code><br>~~
	~~<code>sudo make</code><br>~~
	~~<code>sudo ./oled_demo </code>~~
	~~----~~

	~~===FAQ===~~
	*Question:
	**Answer:
	~~----~~

Yoyojacky: Yoyojacky moved page 0.96 Inch OLED Module SKU:EP-0049 to EP-0049

2021-08-27T11:55:04Z

Yoyojacky moved page 0.96 Inch OLED Module SKU:EP-0049 to EP-0049

← Older revision	Revision as of 19:55, 27 August 2021
(No difference)

Yoyojacky: /* Purchase Links */

2016-09-23T06:53:57Z

Purchase Links

← Older revision		Revision as of 14:53, 23 September 2016
Line 65:		Line 65:
	*Question:		*Question:
	**Answer:		**Answer:
	~~----~~
	~~==Purchase Links==~~
	~~[[File:shopping_car.png\|left\|21px]][http://www.52pi.com 52Pi Store]~~
	----		----

Yoyojacky: /* Description */

2016-07-11T10:29:05Z

Description

← Older revision		Revision as of 18:29, 11 July 2016
Line 1:		Line 1:
	='''0.96 Inch OLED Module'''=		='''0.96 Inch OLED Module'''=
	==Description==		==Description==
	~~<pre>~~		These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. <br>
	These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display.		This display is made of 128x64 individual yellow and blue OLED pixels, each one is turned on or off by the controller chip.<br>
	This display is made of 128x64 individual yellow and blue OLED pixels, each one is turned on or off by the controller chip.		Because the display makes its own light, no backlight is required. <br>
	Because the display makes its own light, no backlight is required.		This reduces the power required to run the OLED.<br>
	This reduces the power required to run the OLED.		This breakout can be used with either an SPI interface<br>
	This breakout can be used with either an SPI interface		The design is completely 3.3V-ready, with an onboard regulator and built in boost converter.<br>
	The design is completely 3.3V-ready, with an onboard regulator and built in boost converter.		The SSD1306 embeds with contrast control, display RAM and oscillator, which reduces the number of<br>
	The SSD1306 embeds with contrast control, display RAM and oscillator, which reduces the number of		external components and power consumption. <br>
	external components and power consumption.		It has 256-step brightness control.<br>
	It has 256-step brightness control.		it supports Raspberry Pi A, A+,B,B+,2B,3B.<br>
	it supports Raspberry Pi A, A+,B,B+,2B,3B.<~~/pre~~>
	----		----

Yoyojacky: /* Parameters: */

2016-07-11T10:26:56Z

Parameters:

← Older revision		Revision as of 18:26, 11 July 2016
Line 27:		Line 27:

	==Parameters:==		==Parameters:==
	~~----~~
	*Dimensions: 36.36mm x 29.53mm x 11.65(include header)mm		*Dimensions: 36.36mm x 29.53mm x 11.65(include header)mm
	*Weight without package: 7.15±2g		*Weight without package: 7.15±2g
	----		----

	==Hardware Architechture==		==Hardware Architechture==
	[[File:096oled.png\|thumb\|left\|300px]]		[[File:096oled.png\|thumb\|left\|300px]]

Yoyojacky at 10:26, 11 July 2016

2016-07-11T10:26:03Z

← Older revision		Revision as of 18:26, 11 July 2016
Line 31:		Line 31:
	*Weight without package: 7.15±2g		*Weight without package: 7.15±2g
	----		----
			==Hardware Architechture==
			[[File:096oled.png\|thumb\|left\|300px]]
			<br style="clear:both;">
			----
	==Package included:==		==Package included:==
	1 x 0.96 Inch OLED Module		1 x 0.96 Inch OLED Module

Yoyojacky: /* Feature: */

2016-07-11T10:22:34Z

Feature:

← Older revision		Revision as of 18:22, 11 July 2016
Line 15:		Line 15:

	==Feature:==		==Feature:==
	* Resolution: 128 x 64 ~~dot matrix panel~~		* Resolution: 128 x 64
	* ~~Power supply~~: 3.3V		* 3.3V work voltage ,([MIN 1.6V] ,[MAX:3.6V])
			** Maximum current 100uA
			** Keep up current 12.25uA
			* Hardware keep up display
			* SPI driver support
			* FP frequency: 30fps(60MHz)
	* Only use 3 pins to control OLED: (IO24 = DC, IO25 = Reset, SPI0)		* Only use 3 pins to control OLED: (IO24 = DC, IO25 = Reset, SPI0)
	* Wide range of operating temperature: -40°C to 85°C		* Wide range of operating temperature: -40°C to 85°C

Yoyojacky: /* Parameters: */

2016-07-11T10:14:45Z

Parameters:

← Older revision		Revision as of 18:14, 11 July 2016
Line 23:		Line 23:
	==Parameters:==		==Parameters:==
	----		----
	*Dimensions: 36.36mm x 29.53mm x 10.01(include header)mm		*Dimensions: 36.36mm x 29.53mm x 11.65(include header)mm
	*Weight without package: 7.15±2g		*Weight without package: 7.15±2g
	----		----

	==Package included:==		==Package included:==
	1 x 0.96 Inch OLED Module		1 x 0.96 Inch OLED Module

Yoyojacky: /* Feature: */

2016-07-11T10:12:40Z

Feature:

← Older revision		Revision as of 18:12, 11 July 2016
Line 15:		Line 15:

	==Feature:==		==Feature:==
	*Resolution: 128 x 64 dot matrix panel		* Resolution: 128 x 64 dot matrix panel
	*Power supply		* Power supply: 3.3V
	**VDD = 1.65V to 3.3V ~~for IC logic~~		* Only use 3 pins to control OLED: (IO24 = DC, IO25 = Reset, SPI0)
	**VCC = 7V to ~~15V for Panel driving~~		* Wide range of operating temperature: -40°C to 85°C
	*For matrix display
	**OLED ~~driving output voltage~~, ~~15V maximum~~
	**Segment maximum source current: 100uA
	**Common maximum sink current: 15mA
	**256 step contrast brightness current control
	*Embedded 128 x 64 bit SRAM display buffer
	*Pin selectable MCU Interfaces:
	**8-bit 6800/8080-series parallel interface
	**3 /4 wire Serial Peripheral Interface
	**I2C Interface
	*Screen saving continuous scrolling function in both horizontal and vertical direction
	*RAM write synchronization signal
	*Programmable Frame Rate and Multiplexing Ratio
	*Row Re-mapping and Column Re-mapping
	*On-Chip Oscillator
	*Chip layout for COG & COF
	*Wide range of operating temperature: -40°C to 85°C
	----		----

	==Parameters:==		==Parameters:==
	----		----

Yoyojacky: /* Description */

2016-07-11T10:07:19Z

Description

← Older revision		Revision as of 18:07, 11 July 2016
Line 1:		Line 1:
	='''0.96 Inch OLED Module'''=		='''0.96 Inch OLED Module'''=
	==Description==		==Description==
	~~An organic light-emitting diode (OLED) is a light-emitting diode (LED) in which~~ the ~~emissive electroluminescent layer is a film~~ of ~~organic compound that emits light in response to~~ an ~~electric current~~. This ~~layer~~ of ~~organic semiconductor is situated between two electrodes; typically~~, ~~at least~~ one ~~of these electrodes~~ is ~~transparent~~. ~~OLEDs are used to create digital displays in devices such as television screens~~, ~~computer monitors, portable systems such as mobile phones, handheld game consoles and PDAs~~. ~~A major area of research is~~ the ~~development of white~~ OLED ~~devices for use in solid-state lighting applications~~.		<pre>
	~~It's a very tiny display device that you~~ can ~~use it as GPS location display and battery charger status display, or anything else. you can just plug it on your Raspberry Pi's GPIO pin, and it~~ is ~~so easy to drive by downloading a repository from github~~.		These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display.
	~~SSD1306 is a single~~-~~chip CMOS OLED/PLED driver~~ with ~~controller for organic / polymer light emitting~~		This display is made of 128x64 individual yellow and blue OLED pixels, each one is turned on or off by the controller chip.
	~~diode dot-matrix graphic display system. It consists of 128 segments~~ and ~~64commons. This IC is~~		Because the display makes its own light, no backlight is required.
	~~designed for Common Cathode type OLED panel~~.		This reduces the power required to run the OLED.
			This breakout can be used with either an SPI interface
			The design is completely 3.3V-ready, with an onboard regulator and built in boost converter.
	The SSD1306 embeds with contrast control, display RAM and oscillator, which reduces the number of		The SSD1306 embeds with contrast control, display RAM and oscillator, which reduces the number of
	external components and power consumption. It has 256-step brightness control~~. Data/Commands are~~		external components and power consumption.
	~~sent from general MCU through the hardware selectable 6800/8000 series compatible Parallel Interface,~~		It has 256-step brightness control.
	~~I2C interface or Serial Peripheral Interface. It is suitable for many compact portable applications, such as~~		it supports Raspberry Pi A, A+,B,B+,2B,3B.</pre>
	~~mobile phone sub-display, MP3 player and calculator, etc~~.
	it supports Raspberry Pi A, A+,B,B+,2B,3B.
	----		----

	==Feature:==		==Feature:==
	*Resolution: 128 x 64 dot matrix panel		*Resolution: 128 x 64 dot matrix panel