X5000K SKU:EZ-0057

From 52Pi Wiki
(Redirected from X5000K DIY Kits SKU:EZ-0057)
Jump to navigation Jump to search

X5000K DIY Kits

Description

  • X5000K DIY Kits
X5000K-280p1.jpg
X5000-280P2.jpg
X5000-280P3.jpg

X5000-280P7.jpg
X5000-280P12.jpg
X5000-280P6.jpg


For Use With

  • Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B

Operating System

  • Moode Audio Player
  • OSMC
  • Openelec
  • Raspbian Jessie
  • Volumio
  • Pi Core Player

Key Features

  • Ultra-compact chassis
  • Supports up to 1TB 2.5-inch SATA hard drives
  • Dedicated 192kHz/24bit high-quality ESS DAC for best sound quality
  • Used the ESS Technology Sabre premier stereo DAC ES9023
  • ES9023 delivers jitter-free studio quality audio with 112dB DNR
  • Ultra-low-jitter 50MHz clock generator
  • Used the Texas Instruments ultra-low-noise voltage regulator
  • Used the Texas Instruments ClassD amplifier chipset (TPA3118)
  • Up to 2x35w of crystal clear amplification
  • Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
  • Gold-plated RCA connectors
  • Gold-plated Speaker terminal binding post
  • Volume control knob
  • Selected high quality components (Solid Capacitors, Murata MLCC etc)
  • Connects directly to the Raspberry Pi - no additional cables needed
  • Can be used individually with only 3 wire I2S signal connected from other i2s interface
  • AMP can be enabled / disabled with jumper link
  • Powers the Raspberry Pi - no additional power supply
  • Lighted power switch
  • Raspberry Pi status LEDs still visible
  • Duplicated Raspberry Pi HDMI port
  • Easy to change the Raspberry Pi OS SD card - No need to open the case
  • Easy DIY with Raspberry Pi

Power Supply Unit

  • (Optional Accessories)
  • AC 100 - 240V input ~50 / 60Hz, 19Vdc 4A output
  • DC Power Plug Size : 5.5*2.5mm

Specification

Parameters Values
Power supply: 6-24Vdc
Input Ports: 1 x HDMI Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
Output Ports: 1 x HDMI, 2 x RCA connectors, 4 x Speaker terminal binding post
Analog audio output level: 2V RMS
Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
Amplifier output Power: 2 x 35w (4 Ohm 24Vdc)
Size: 122mm x 90mm x 90mm

Notes

WARNING:  DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET. 

Packing List

  • X5000 Metal Case x 1
  • X5000 Expansion Board x 1
  • X800 HDD Expansion Board x 1
  • Metal Case Accessories kit x 1
  • Tool kit x 1

X5000-280P1.jpg
X800 280P1.jpg
X-case-280p2.jpg

X4000-280p6.jpg
X800K-280p1.jpg
Tool kit 280p1.jpg