X4000K SKU:EZ-0055

From 52Pi Wiki
(Redirected from X4000K DIY Kits SKU:EZ-0055)
Jump to navigation Jump to search

X4000K DIY Kits

For Use With

  • Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B

Operating System

  • Moode Audio Player - Supports X4000 HDMI audio and RPi i2s audio
  • OSMC - Supports X4000 HDMI audio
  • Openelec - Supports X4000 HDMI audio
  • Raspbian Jessie - Supports X4000 HDMI audio
  • Rune audio - Supports X4000 HDMI audio
  • Pi Core Player - To be tested

Key Features

  • High-quality ESS DAC for best sound quality
  • Use the ESS Technology flagship DAC chipset (ES9018K2M)
  • 127dB DNR -120dB THD+N
  • It can playback upto 384khz I2S/DSD256 with Raspberry Pi 3 (Over HDMI, Moode Player)
  • Used the Texas Instruments Burr-Brown OPA2604 low noise OP AMP
  • Used the ultralow phase noise 100MHz HiFi TCXO
  • Used the Texas Instruments ultra-low-noise voltage regulator
  • Gold-plated RCA connectors
  • Supports up to 1TB 2.5-inch SATA hard drives
  • Selectable HDMI audio or Raspberry Pi i2S audio
  • Supports SPDIF Optical Digital Audio
  • Supports HDMI high-bit-rate (HBR) audio
  • High quality video performance
  • 3.5mm analog stereo jack output
  • Allows you to split the audio stream from a HDMI signal
  • No HDMI output connection is required to receive audio at the analog and optical outputs
  • Connects directly to the Raspberry Pi - no additional cables needed
  • Can be used individually with only 3 wire I2S signal connected from other i2s interface
  • Ultra-compact chassis
  • Powers the Raspberry Pi - no additional power supply
  • Lighted power switch
  • Raspberry Pi status LEDs still visible
  • Easy to change the Raspberry Pi OS SD card - No need to open the case
  • Easy DIY with Raspberry Pi

Specification

Parameters Values
Power supply: +5Vdc +/-5%
Input Ports: 1 x HDMI, Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
Output Ports: 1 x HDMI, 2 x RCA connectors, 1 x 3.5mm Phone Jack + Optical
Analog audio output level: 2V RMS
Resolution/Sampling Rate: upto 32bit / 384KHz (ES9018K2M), upto 24bit / 192KHz (Raspberry Pi I2S), upto 24bit / 192KHz (Optical S/PDIF Audio)
Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
Size: 122mm x 90mm x 90mm

Power Supply Unit

  • AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
  • With 2 snap-in plugs for North America (US) and Europe (EU)
  • DC Power Plug Size : 5.5*2.5mm

Notes

For use with original power supply unit only
WARNING: 
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET. 
Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed
(The powerful HDMI audio processing chipset needs time to bootup)

Packing List

  • X4000 Metal Case x 1
  • X4000 Expansion Board x 1
  • X800K HDD Expansion Board x 1
  • Power Adapter 5V 4A x 1
  • Metal case Accessories kit x 1
  • Tool kit x 1

Gallery

Xseries case-280p1.jpg
X4000k2.jpg

X4000k3.jpg
X4000k4.jpg

X4000k3.jpg
X4000k4.jpg

X4000k5.jpg
X4000k6.jpg

X4000-280p1.jpg
X800 280P1.jpg

PA 5V 4A 280p1.jpg
X800K-280p1.jpg

Tool kit 280p1.jpg
X-case-280p1.jpg