Pitaya Go IoT SKU: Z-0269

From 52Pi Wiki
Jump to navigation Jump to search

Pitaya Go IoT

Z 0269 4.jpg

Description

Pitaya Go is a compact and versatile development platform for IoT solutions, combining the Nordic's high-end multiprotocol SoC nRF52840 and the Microchip's extreme low power Wi-Fi® network controller ATWINC1500B.
It offers a complete solution for wireless connectivity with IEEE 802.11 b/g/n, Bluetooth 5, Thread and Zigbee, that is specifically designed for the IoT.
Pitaya Go features a Battery Charger with power path management, 64Mbit ultra low power QSPI Flash memory, additional NFC-A Tag PCB Antenna, user programmable RGB LED and Buttons, reversible USB-C Connector and easily expandable Header Sockets.

Features

Nordic Semiconductor nRF52840 SoC

  • 64 MHz Arm® Cortex-M4 with FPU
  • 1 MB Flash + 256 KB RAM
  • Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary
  • Arm TrustZone® Cryptocell 310 Security Subsystem
  • Integrated USB 2.0 Full-speed Controller
  • QSPI/SPI/TWI/I²S/PDM/QDEC/ADC support
  • Integrated NFC-A Tag

Microchip ATWINC1500B Wi-Fi Network Controller

  • Shipped with the latest firmware 19.6.1
  • IEEE 802.11 b/g/n 20 MHz (1x1) Solution
  • Extreme low power with Shutdown Control
  • On-Chip Network Stack to Offload MCU
  • Supports Soft-AP
  • Security protocols supported: WPA/WPA2 Personal, TLS/SSL
  • Enterprise Security with WPA/WPA2 (802.11x)
  • Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS, MQTT, etc.

Memory and Power

  • 64Mbit ultra-low power QSPI Flash Memory
  • Integrated Li-Po Battery Charger with Power Path Management
  • Additional NFC-A Tag PCB Antenna
  • User programmable RGB LED and Buttons
  • Dual Wi-Fi/Bluetooth 2.4G Chip Antennas
  • Reversible USB-C Connector
  • Li-Po Battery Connector
  • Easily expandable dual 14-Pin Header Sockets
  • Measures 2.4" x 1.0" x 0.3" (60.96mm x 25.4mm x 7.6mm)

Gallery

Z 0269 1.jpg
Z 0269 2.jpg
Z 0269 3.jpg

Hardware Diagram

Z 0269 5.jpg


Package Includes

  • 1x Pitaya Go board
  • 1x NFC-A PCB Antenna with MHF I connector
  • 1x USB-C Cable
Z 0269 4 2.jpg


Documentations

Keywords

  • Pitaya Go IoT, Development board, nrf5-sdk, pitaya, geeekpi, 52pi, programming, wifi tutorials, openthread tutorials