EP-0111

From 52Pi Wiki
Jump to navigation Jump to search

ICE Tower Cooling Fan Black

PI4 banner 3.jpg
PI3-banner 3.jpg

Description

This ICE Tower Cooling Fan black is burned for solving heat dissipation problem too!
Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi.
In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
Best of all, this super cooling fan support both Raspberry Pi 3B+ and the new Raspberry Pi 4B.
The fan has 7 different color LEDs that change automatically, making your fan more beautiful and personalized.

Features

  • DC 5V Power in (Can be powered by the Raspberry Pi)
  • Ice Tower Structure
  • 5mm copper tube
  • Super heat dissipation
  • Rated power 0.4W @5V, 0.08A
  • Super Cool fan background light (7 Colors)
  • Easy to setup
  • Compatible with Raspberry Pi 3B+/4B
  • Plug and play

Dimensions

  • The Dimensions is the same as ICE Tower CPU Cooling Fan.
EP 0111 1 3.jpg
EP 0111 2 3.jpg

Gallery

Raspberry Pi 4B

  • It can be compatible with several acrylic case.
  • Colorful case, Black & White, All black case.
Dianl 1 2.jpg
Dianl 1 3.jpg
Dianl 1 4.jpg

Raspberry Pi 3B+

Blkice1.jpg
Blkice2.jpg
Blkice3.jpg

How to assemble

  • Front view
区分图1.jpg


  • Back view
区分图2.jpg


Raspberry Pi 3B+

  • 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
  • 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
  • 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Raspberry Pi 4B

  • 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
  • 2. Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
  • 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Package Include

  • 1 x Ice Tower radiator and Fan
  • 2 x Steel Mounting brackets
  • 8 x M2.5x6 Copper sticks
  • 4 x M2.5 Nuts
  • 6 x M2.5x4 screws
  • 3 x Thermal Tape
  • 1 x Screw Driver
  • 1 x Protective Acrylic Panel
全套.jpg


PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.

FAQ

  • Q: Can it be install to my retroflag case?
 A: No, the dimension is too big. 
  • Q: How many degrees can be decreased ?
 A: We've tested it at room temperature 25℃, it can decreased about 40℃.
  • Q: Does it easy to assemble?
 A: Yes, it is very easy to install, we've provided an instruction for you.