DS213 mini oscilloscope SKU: Z-0241

From 52Pi Wiki
Jump to navigation Jump to search

DS213 mini oscilloscope

Z024109.jpg

Description

DS213 is a 5-track 4-wire general electronic engineering task digital storage oscilloscope based on the ARM Cortex M3 core. DS213 adopts the working mode of FPGA management and control of external ADC and data cache, provides 4 application program partitions, which can be used to load and upgrade up to 4 different application firmware; built-in 8MB U disk, can store waveforms and upgrade system firmware . The application layer of oscilloscope code is open source, and users can develop oscilloscope firmware at will.
DS213 pocket-size oscilloscope is a four channel digital storage oscilloscope with 320*240 Color TFT display and rechargeable battery, It smaller and portable and it has 2 analog channel & 2 digital channel and 1 signal out, it compact and fashionable because of its tiny smaller body, it just 10mm in thickness and protected by aluminum case, and sampling rate can be 100M Sa/S. It is widely applicable in academic experiment, electronics maintenance, electronic engineering tasks, Maker’s DIY project, etc.

Features

  • Small size, light weight, easy to carry, and handheld operation;
  • The waveform data can be stored, and the waveform analysis and comparison is more efficient and intuitive;
  • Multiple trigger methods, support positive and negative edge trigger, logic trigger, pulse width trigger;
  • Powerful waveform processing capability, which can automatically measure parameters such as voltage, frequency, pulse width, etc.

Technical Parameter

  • Main control CPU: ARM Cortex M3
  • FIFO and control: FPGA
  • ADC: HWD9288-100
  • Number of analog channels: 2 ([CH_A] [CH_B])
  • Number of digital channels: 2 ([CH_C] [CH_D])
  • Number of calculation channels: INV [CH_A], INV [CH_B], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] | [CH_D]
  • Vertical sensitivity: 10mV-10V/div (1-2-5 STEP) (when using x1 probe) 100mV-100V/div (1-2-5 STEP) (when using x10 probe)
  • Vertical resolution: 8 bits
  • Storage depth: 4 channels 4*4K
  • Input coupling mode: DC, AC
  • Maximum input voltage: ±40Vpp when using x1 probe ±400Vpp when using x10 probe
  • Soft trigger type: positive and negative edge trigger, pulse width trigger, logic trigger
  • Trigger mode: automatic, standard, single, instant scan
  • Trigger source: [CH_A] [CH_B] [CH_C] [CH_D]
  • Signal source: square wave: 20 gears 3Vpp signal source from 10Hz to 8MHz
  • Sine wave, triangle wave, sawtooth wave: 11 gears of 3Vpp signal source from 10Hz to 20KHz
  • File storage capacity: built-in 8M USB disk
  • File storage format: BMP, BUF, CSV
  • Automatic measurement type: maximum value, minimum value, peak-to-peak value, average value, effective value, frequency, period, pulse width, duty cycle
  • Cursor measurement: time value, amplitude value
  • Display mode: 4 lines display: 1 line: [CH_A], HIDE
  • Line 2: [CH_B], HIDE
  • 3-wire: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE
  • 4 lines: [CH_D], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] | [CH_D], HIDE
  • Sampling mode: real-time sampling
  • Sampling rate: 100M Sa/s
  • Battery power supply: 1000mAh
  • Dimensions: 99.5mm (length) x58.5mm (height) x13.5mm (thickness)
  • Weight: 129g (including battery)
  • Certification: CE, FCC

Gallery

Z024102.jpg
Z024103.jpg
Z024104.jpg
Z024105.jpg
Z024106.jpg

Application Senario

Z024116.jpg
Z024117.jpg
Z024118.jpg
Z024119.jpg
Z024120.jpg
Z024121.jpg

Dimension

  • DS213 mini oscilloscope
Z024107.jpg


  • Package Dimension
Z024108.jpg


Pacakge Includes

  • SainSmart DSO213 Oscilloscope
  • X10 Probe Analyzer ×1
  • X1 Probe Analyzer ×1
  • Instructions x1
  • Hex Key ×1
Z024101.jpg


Certifications

Keywords

  • SainSmart DSO213 Oscilloscope, mini oscilloscope, DS213