Acrylic Case for X825 SKU: ZP-0097

From 52Pi Wiki
Jump to navigation Jump to search

Acrylic Case for X825

Tmwkk14.jpg

Description

This is an acrylic case customized for X825.
It has a fan cooling function, and is easy to assemble and prevent accidental short circuit.
The transparent case is more convenient to observe the operation status of internal equipment.

Features

  • Easy to assemble
  • 4010 Fan provide good heat dissipation effect
  • Acrylic Material
  • Good stability of copper pillars

Gallery

Tmwkk8.jpg
Tmwkk9.jpg
Tmwkk10.jpg
Tmwkk1.jpg
Tmwkk12.jpg
Tmwkk14.jpg

Connection Details

Tmwkk15.jpg


Application Scenario

Tmwkk13.jpg


Package Includes

  • 1 x Acrylic Case for X825

How to assemble

  • 1. After removing the protective film of the acrylic plate, fix the copper studs to the acrylic plate.
  • 2. Fix the 2.5-inch hard disk to the X825 motherboard with screws.
  • 3. Pass the switch button through the acrylic hole, fix the button with the screw ring on the switch button, and connect the cable to X825 (including fan and switch power supply, Raspberry Pi power cable).
  • 4. Fix the Raspberry Pi on the copper post with screws, and fix the long copper posts around it.
  • 5. Fix the upper cover to the copper pillar on the outside with screws.
X825安装图 (2).jpg


Keywords

  • X825, Acrylic case for x825, Raspberry Pi 4B, 4010 Fan, SSD shield