X5000P SKU:EZ-0053
Jump to navigation
Jump to search
X5000P Raspberry Pi HiFi Sound Card
Description
Raspberry Pi HiFi Sound Card.
For Use With
- Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
Operating System
- Moode Audio Player
- OSMC
- Openelec
- Raspbian Jessie
- Volumio
- Pi Core Player
Key Features
- Dedicated 192kHz/24bit high-quality ESS DAC for best sound quality
- Used the ESS Technology Sabre premier stereo DAC ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Ultra-low-jitter 50MHz clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Used the Texas Instruments ClassD amplifier chipset (TPA3118)
- Up to 2x35w of crystal clear amplification
- Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
- Gold-plated RCA connectors
- Volume control knob
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Connects directly to the Raspberry Pi
- Can be used individually with only 3 wire I2S signal connected from other i2s interface
- AMP can be enabled / disabled with jumper link
- Powers the Raspberry Pi - no additional power supply
- Duplicated Raspberry Pi HDMI port
- Easy DIY with Raspberry Pi
Power Supply Unit
- AC 100 - 240V input ~50 / 60Hz, 19Vdc 4A output
- DC Power Plug Size : 5.5*2.5mm
Specification
Parameters | Values |
---|---|
Power supply: | 6-24Vdc |
Input Ports: | 1 x HDMI , Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND) |
Output Ports: | 1 x HDMI, 2 x RCA connectors |
Analog audio output level: | 2V RMS |
Resolution/Sampling Rate: | Upto 24bit / 192KHz (Raspberry Pi I2S) |
Amplifier output Power: | 2 x 35w (4 Ohm 24Vdc) |
Size: | 122mm x 90mm x 90mm |
Notes
WARNING: DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
Packing List
- X5000 Expansion Board x 1
- HDMI bridge x 1
- Power switch x 1
- Volume control board x 1
- Screw M2.5 *6mm x 8
- Spacer M2.5 *20mm x 4
- Speaker connection wire 20cm x 1