X4000K SKU:EZ-0055
Jump to navigation
Jump to search
X4000K DIY Kits
For Use With
- Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
Operating System
- Moode Audio Player - Supports X4000 HDMI audio and RPi i2s audio
- OSMC - Supports X4000 HDMI audio
- Openelec - Supports X4000 HDMI audio
- Raspbian Jessie - Supports X4000 HDMI audio
- Rune audio - Supports X4000 HDMI audio
- Pi Core Player - To be tested
Key Features
- High-quality ESS DAC for best sound quality
- Use the ESS Technology flagship DAC chipset (ES9018K2M)
- 127dB DNR -120dB THD+N
- It can playback upto 384khz I2S/DSD256 with Raspberry Pi 3 (Over HDMI, Moode Player)
- Used the Texas Instruments Burr-Brown OPA2604 low noise OP AMP
- Used the ultralow phase noise 100MHz HiFi TCXO
- Used the Texas Instruments ultra-low-noise voltage regulator
- Gold-plated RCA connectors
- Supports up to 1TB 2.5-inch SATA hard drives
- Selectable HDMI audio or Raspberry Pi i2S audio
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- High quality video performance
- 3.5mm analog stereo jack output
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi - no additional cables needed
- Can be used individually with only 3 wire I2S signal connected from other i2s interface
- Ultra-compact chassis
- Powers the Raspberry Pi - no additional power supply
- Lighted power switch
- Raspberry Pi status LEDs still visible
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Easy DIY with Raspberry Pi
Specification
Parameters | Values |
---|---|
Power supply: | +5Vdc +/-5% |
Input Ports: | 1 x HDMI, Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND) |
Output Ports: | 1 x HDMI, 2 x RCA connectors, 1 x 3.5mm Phone Jack + Optical |
Analog audio output level: | 2V RMS |
Resolution/Sampling Rate: | upto 32bit / 384KHz (ES9018K2M), upto 24bit / 192KHz (Raspberry Pi I2S), upto 24bit / 192KHz (Optical S/PDIF Audio) |
Optical Audio Format: | LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH |
Size: | 122mm x 90mm x 90mm |
Power Supply Unit
- AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
- With 2 snap-in plugs for North America (US) and Europe (EU)
- DC Power Plug Size : 5.5*2.5mm
Notes
For use with original power supply unit only WARNING: DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET. Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed (The powerful HDMI audio processing chipset needs time to bootup)
Packing List
- X4000 Metal Case x 1
- X4000 Expansion Board x 1
- X800K HDD Expansion Board x 1
- Power Adapter 5V 4A x 1
- Metal case Accessories kit x 1
- Tool kit x 1