EP-0094

From 52Pi Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Raspberry Pi GPIO Breakout Board Big Black(T-Type)

Gpiobreak001.jpg

Description

It is a breatout board for your Raspberry Pi's GPIO experiment.
It based on T type breakout board and made some changes, the board is fit for your breadboard perfectly.
And it compatiable for Raspberry Pi 2B/2B+/3B/3B+/4B/Zero/ZeroW.

Features

  • Smaller than before
  • fit for GPIO experiment
  • Clear GPIO function definitions shown
  • BCM named GPIO lable
  • Plug and Play
  • Easy to assemble
  • Weight: 0.085kg

How to assemble

  • 1. Connect the 40Pin wire to GPIO breakout board.
    • Please make sure the white wire connect to the pin holder, there is a trangle mark on the board.
Gpiobreak006.jpg


    • Please make sure the white trangle against to the trangle mark which is on the 40 Pin wire.
  • 2. Connect the 40 Pin wire to your Raspberry Pi's GPIO, please make sure the white wire conncect to you Pi's GPIO Pin 1(3.3v)
  • 3. Connect the GPIO Breakout baord to the center of breadboard.
Gpiobreak004.jpg


  • 4. (Optional) Remove the protect film on breadboard and paste it to the project board.
Gpiobreak003.jpg


Gallery

Gpiobreak005.jpg
Gpiobreak001.jpg
Gpiobreak002.jpg


Package Include

  • 1 x Big Black T Type Breakout Board
  • 1 x 40Pin Wire Cable