EP-0107

From 52Pi Wiki
Jump to navigation Jump to search

ICE-Tower CPU Cooling Fan for Raspberry Pi

塔式风扇-精-3.jpg

Description

According to Moore's law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex.
Higher processing performance will generate more heat.
This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem!
Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi.
In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
Best of all, this super cooling fan support both Raspberry Pi 3B+ and the new Raspberry Pi 4B.
When the fan turns up, you will see the color of ice.
The tower fan has 7 different color LEDs that change automatically, making your fan more beautiful and personalized.

Features

  • DC 5V Power in (Can be powered by the Raspberry Pi)
  • Ice Tower Structure
  • 5mm copper tube
  • Super heat dissipation
  • Rated power 0.4W @5V, 0.08A
  • Super Cool fan background light (Blue Color)
  • Easy to setup
  • Compatible with Raspberry Pi 3B+/4B

Dimensions

Icetower01.jpg
Icetower02.jpg

Gallery

Raspberry Pi 4B

Icetower4b1.png
Icetower4b2.jpg
Icetower4b3.jpg
Icetower4b4.jpg
Icetower4b5.jpg
Icetower4b6.jpg

Raspberry Pi 3B+

Icetower07.jpg
Icetower03.jpg
Icetower05.jpg
Icetower06.jpg
Icetower04.jpg

How to assemble

Rpi3bthermaltape.png
Icetowerassemble05.jpg
Icetowerassemble03.jpg
Icetowerassemble02.jpg
Icetowerassemble01.jpg
塔式风扇-精-3.jpg

Raspberry Pi 3B+

  • 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
  • 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
  • 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Raspberry Pi 4B

  • 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
  • 2. Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
  • 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
  • 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Package Include

  • 1 x Ice Tower radiator and Fan
  • 2 x Steel Mounting brackets
  • 8 x M2.5x6 Copper sticks
  • 4 x M2.5 Nuts
  • 6 x M2.5x4 screws
  • 3 x Thermal Tape
  • 1 x Screw Driver
  • 1 x Protective Acrylic Panel
塔式风扇-新2.jpg


PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.

FAQ

  • Q: Can it be install to my retroflag case?
 A: No, the dimension is too big. 
  • Q: How many degrees can be decreased ?
 A: We've tested it at room temperature 25℃, it can decreased about 40℃.
  • Q: Does it easy to assemble?
 A: Yes, it is very easy to install, we've provided an instruction for you.