EZ-0080: Difference between revisions
Jump to navigation
Jump to search
m (Yoyojacky moved page X735 SKU: EZ-0080 to EZ-0080) |
|
(No difference)
|
Latest revision as of 14:18, 3 December 2021
X735 Power Management Board
Descrition
The X735 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40-pin header.
It provides intelligent and safe power management, safe shutdown and full poweroff through software,
an automatic temperature controlled fan which enables the use of the Raspberry Pi in extreme conditions
including very high temperature environments.
The X735 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
- FOR USE WITH
Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+
- OPERATING SYSTEM
Raspbian Stretch Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
Features
- Intelligent and safe power management
- Equipped with both momentary button and latching switch for easy power control
- Press the momentary button to turn on
- Press the momentary button and hold for 1~2seconds to reboot
- Press the momentary button and hold for 3~7seconds to implement safe shutdown
- Press the momentary button and hold for >8seconds to force shutdown
- Supports safe shutdown and full poweroff through software
- On-board switch convenient to select latching or momentary power control switches
- Press the latching power switch once to turn on and again to implement safe shutdown
- On-board LED shows the status of power on, reboot and shutdown
- On-board PH2.0 connectors allows to use external latching switch or momentary button
- Powers the Raspberry Pi via the 40-pin header - no additional cabling required
- Allows power input via DC jack or Micro-USB socket or XH2.54 connector
- Allows power output via XH2.54 socket and or the 40-pin header
Note:
- Dual trip point temperature controlled cooling fan
- Auto-Control the fan for Cooling / quiet Operation
- Board temperature ≤34C - Fan running at low speed
- Board temperature ≥34C - Fan running at medium speed
- Board temperature ≥45C - Fan running at full speed
- On-board LEDs show the status of fan running low and high
- No driver and additional setting required for the cooling fan
- Reserved 40-pin stackable Header for Add-On Boards
- Works with all current models of the Raspberry Pi using a 40 pin header
- On-board micro-USB socket for power input - No need to change the power adapter
- Fully compatible with X820, X850, X860, X870, X822, X852 to provide intelligent and safe power management
Specifications
- Power supply: 5.1Vdc +/-5%,2.5~4A
- Board size: 65 x 58mm
Note
- Full poweroff through software is not supported when using latching power switch
Do not apply power to your Raspbeery Pi via the Pi's Micro-USB socket
Package Includes
Product Name | Quantity |
---|---|
X735 Power mgt Board | 1 |
2-Pin Power Connection Wire | 1 |
Screw M2.5 *6mm | 8 |
Spacer F/F M2.5 *12mm | 4 |
Spacer F/F M2.5 *12mm | 4 |
Function Description
Gallery
Installation Guide
Power Jack, power input and power output
Power input | 5Vdc +/- 5% , 2.5~4A |
DC Power Plug Size | 5.5*2.5mm |
Micro USB power socket | Pin 1 - 5Vdc, Pin 5 - GND |
Power input / output connector | XH2.54mm 2pin |
1. X735 powers the Raspberry Pi via the 40-pin header (Pin 2 & 4) 2. Don't power the Raspberry Pi via the Pi's Micro USB socket 3. X735 can be powered via the onboard DC jack or Micro USB power socket or XH2.54 connector.
Select momentary power button or latching power switch
Selector Switch pressed | Latching switch enabled, Momentary button disabled |
Selector Switch released | Latching switch disabled, Momentary button enabled |
Power adapter must be disconnected when selecting momentary button or latching switch.
Connectors for External Power Switch
Pin No. | Pin Description |
---|---|
1 | Power on/off control connecting to switch |
2 | Ground |
3 | Ground |
4 | LED+ for power on, rebooting and shutdown |
Connector - Pitch 2.0mm 4pos
Using momentary power button
Press and Release | Raspberry Pi and X735 turn on Power LED stays on |
Press and hold for 1~2 seconds | System rebooting Power LED Blinks rapidly |
Press and hold for 3~7 seconds | System shutting down Power LED Blinks slowly |
Press and hold for >8 seconds | Force shutdown |
*Script for power control installed
Using latching power switch
Switch pressed | Raspberry Pi and X735 turning on The PWR LED stays on |
Switch released (Script for power control installed) | System shutting down and the PWR LED blinking slowly |
Switch released(Script for power control not installed) | The PWR LED stays on and will force shutdown after 8 seconds |
The onboard latching power switch should not be pressed when using an external latching switch.
Pins and GPIO used
Pin No. | Usage |
2, 4 | +5V power supply |
6 | Ground |
7 | GPIO4 for power management |
11 | GPIO17 for power management |
12 | GPIO18 for power management |
Board Assembly
Push a screws (M2.5*6mm) up through the mounting hole on the underside of the Raspberry Pi.
Screw the spacer (M2.5*12mm) down until it is hand tight
Plugs the X735 board straight into your Raspberry Pi B+'s GPIO header and screw down (M2.5*6mm)
Optional -To use with X820/X850/X822/X852/X860/X870 a) Unscrew 4 screws on the topside of Raspberry pi b) Screw the M/F spacer (M2.5*12 / M2.5*20) down until it is hand tight
Plugs the X735 straight into your Raspberry Pi's GPIO header and screw down (M2.5*6mm)
Connect the 2-pin power connection wire from the 5V connector on X735 to X820/X850/X822/X852/X860/X870
Power adapter must be connected to power management board only , not X860 and Raspberry Pi
Software Guide
- [ Download: | https://www.raspberrypi.org/downloads/raspbian/]
- Download the required script
pi@raspberrypi ~ $ wget https://raw.githubusercontent.com/suptronics/X730-script/master/x730.sh
- Install the script
pi@raspberrypi ~ $ sudo bash x730.sh
- Setting up the command to turn off X720 from software
pi@raspberrypi ~ $ printf "%s\n" "alias x730off='sudo x730shutdown.sh'" >> ~/.bashrc
- Reboot the Raspberry Pi
pi@raspberrypi ~ $ sudo reboot
- Powering off the Raspberry Pi from software
pi@raspberrypi ~ $ x730off
FAQ
- Q: Is it compatible with X870?
A: Yes, it is.
Keywords
- X735, Raspberry Pi ,Power Management Board,Intelligent and safe power management