EZ-0024
Jump to navigation
Jump to search
GPS Module SKU:EZ-0024
Description
The module uses U-BLOX NEO-6M module.The module comes with high-performance ceramic antenna, which is equival of the integrated active antenna.
Module comes with EEPROM. All configuration information can be stored in the EEPROM. A variety of configurations to meet your needs.
The module also comes with a rechargeable backup battery (to support warm or warm start. after the main power supply power off, back-up battery power can maintain a half hour for GPS receiver data stored).
Features
- Using U-BLOX NEO-6M module , compact size , excellent performance.
- Comes with ceramic antenna , strong star search capability .
- Various parameters can be set via the serial port , and can be stored in the EEPROM, easy to use.
- Compatible with 3.3V / 5V level for easy connection to a variety of microprocessor systems.
- Comes with a rechargeable battery back-up , power-down can keep the ephemeris data.
Technical Parameters
Parameters | Value |
---|---|
Power Supply | 3V/5V |
Model | GPS-NEO-6M-001 |
Antenna | ceramic antenna |
Battery | rechargeable battery back-up |
Signal light | LED light |
Antenna size | 25*25mm |
Model size | 25.5mm*31.5mm |
Mounting Hole | 2mm |
The default baud rate | 38400 |
The default output | Compatible with NMEA0183 protocol |
Notice
- Outdoor use
- Note Lightning and waterproof
- Do not support Raspberry Pi 3 B (Because of RPi 3B's serial port problem, it may have other solution)
Package includes:
- 1x GPS module
How to wire up
It can be just wire to your Raspberry Pi B/B+/2B's GPIO Pin, TxD and RxD as following picture: