EP-0214
HDMI-TO-CSI2 adapter board for Raspberry Pi
Descriptions
Raspberry Pi Hdmi to CSI-2 Module with Toshiba TC358743XBG chip, Hdmi-input supports up to 1080p25fps, output supports up to 60fps. Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W. HDMI To CSI Adapter for Raspberry Pi is an HDMI to CSI camera port adapter designed for the Raspberry Pi 4/3 with up to 1080p@30fps support from HDMI input and is backwards compatible. It allows you to use any camera with an HDMI output, such as Canon, Nikon or GoPro action cameras, as a standard Raspberry Pi CSI camera, even you can record the screen which is output from another Raspberry Pi HDMI port.
Feautures
- Easy to assemble
- FPC cable supports 15Pin@ 2Lanes or 22Pin @ 4Lanes (CM4 Computer module only)
- Chipset: Toshiba TC358743XBG
- Input signal: Full-sized HDMI
- Soldering Pad support
- Output signal: CSI
- Function: HDMI-TO-CSI2 (H2C for short)
- Limitation: HDMI input support up to 1080p30fps
- Compatible with: Raspberry Pi 4B/3B+/3B/3A+/Pi zero/Pi zero W/Pi zero 2W
Note: This module does not support OctoPi OS.
Gallery
Getting Start
For Raspberry Pi 4B/3B+/3B/3A+/Pi zero/Pi zero W/Pi zero 2 W
NOTE: We recommend you to use the Raspberry Pi OS which download from Raspberry Pi Official Website.
To use the kernel drivers, please update your system. There are a few things that have changed with the 5.4 kernel, so these instructions are for 5.4 or later. If "uname -a" reports anything less, then fix this before proceeding.