EP-0088
Pi Zero Enc28j60 Network Adapter Module
Description
For Pi Zero Generation, no NIC is inconvenient, because its core system is Linux,
most of operations are based on linux's command line via ssh service, so a Network Adapter is required.
The Pi zero Enc28j60 is a simple Network Adapter module for Pi zero
It is very easy to assemble and configure.
It allows your Raspberry Pi zero to access the network smoothly, and it is easy to do system updates and software installation operations.
Compatibility List
- Compatibility
Platform | Version 1.01(HW V1.01) | Notes |
---|---|---|
Raspberry Pi 3 Model B Plus | √ | |
Raspberry Pi zero | √ | |
Raspberry Pi zero W | √ | |
Raspberry Pi 3 Model B | √ | |
Raspberry Pi 2 Model B | √ | |
Raspberry Pi Model B+ | √ |
Features
- Easy to assemble
- Easy to setup
- Official OS overlay support
- Stable and fast
- Weight: 0.015Kg
- Dimension: 65.14mm x 29.93mm x 23.34mm
Gallery
How to configure it
- 1. Install the NIC module into the raspberry Pi.
- 2. Connect the network cable to ensure that your router supports DHCP and works well.
- 3.Burn the Raspbian image to TF card.
- 4. Edit the /boot/config.txt file by your favorite editor such as "nano" or "vim.tiny", and add the following parameter:
dtoverlay=enc28j60
Then save the exit and reboot the raspberry Pi.
NOTE: The module is tested only in raspbian environments.
How to check if network adapter works well
Open a terminal and typing this command:
ifconfig
You will see the detail of Pi zero Enc28j60 network adapter module.
Package include
- Pi zero Enc28j60 Network Adapter Module x 1
- Instruction x 1
Video Tutorial
Please follow the link:
[How to use Enc28J60 Network adapter module on raspberry pi | https://youtu.be/Fog7OncKMQY ]