EP-0120: Difference between revisions
Jump to navigation
Jump to search
Line 36: | Line 36: | ||
<br style="clear:both;"> | <br style="clear:both;"> | ||
==Package Includes== | ==Package Includes== | ||
* 1 x Dual Fan Hat for RPi | * 1 x Dual Fan Hat for RPi | ||
* 1 x Copper Pad Heat Sink | |||
* 2 x Black Aluminum Heat Sink | |||
* 4 x Silver Aluminum Heat Sink | |||
* 4 x M2.5 Screw | |||
* 4 x M2.5 Nut | |||
* 4 x M2.5 Copper Pillar | |||
[[File:EP-0120-Dual-Fan-Hat-(双风扇Hat板).jpg|left|500px]] | |||
<br style="clear:both;"> | |||
==Keywords== | ==Keywords== | ||
* Dual Fan Hat, Raspberry Pi 4B, heat sink module, switch fan control | * Dual Fan Hat, Raspberry Pi 4B, heat sink module, switch fan control |
Revision as of 16:05, 28 December 2020
Dual Fan Hat for RPi
Description
The controllable LED switch and fan switch provided by the dual fan hat board can be adjusted when needed, when the light is not needed, the LED light can be turned off, when the fan is not needed, the fan, fan and LED light can be turned off Can be adjusted independently.
Features
- Easy to assemble
- LED independent control
- Independent fan control
- Pull out the GPIO pin
Mechanical Drawing
Gallery
- Specifications
- Application Scenario
How to use
- Directly connect the hat board to the GPIO pin of the Raspberry Pi as shown in the figure, and the power supply mode is powered by the Raspberry Pi GPIO pin (5V).
Package Includes
- 1 x Dual Fan Hat for RPi
- 1 x Copper Pad Heat Sink
- 2 x Black Aluminum Heat Sink
- 4 x Silver Aluminum Heat Sink
- 4 x M2.5 Screw
- 4 x M2.5 Nut
- 4 x M2.5 Copper Pillar
Keywords
- Dual Fan Hat, Raspberry Pi 4B, heat sink module, switch fan control